I have a usb webcam with audio plugged into my computer, and a cs46xx sound card inside.
When I boot the following sequence occurs: (1) the hotplug subsytem is started. This automatically loads the snd-usb-audio module and the modules it depends on. In particular /proc/asound/ is created. (2) the alsasound init script is run. It detects that /proc/asound/ exists, and exits at once. In particular it does not restore mixer levels for the cs46xx card. I solved this by commenting out the check for /proc/asound/ in the init script. The problem goes deeper though, especially when things like usb audio devices are around, which can be hotplugged: maybe sound card modules should really be calling the hotplug subsystem when they are initialize. The hotplug script would then restore mixer settings etc... Thoughts? Duncan. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
