On Fri, 18 Oct 2002, Bob Ham wrote:
> On Fri, Oct 18, 2002 at 08:31:10PM +0200, Jaroslav Kysela wrote:
>
> > Thanks. I don't see the problem at first glance. Are you trying to capture
> > signal from LiveDrive line #1?
>
> No, from 'Line LineDrive',0
>
> > Could you follow these steps?
> >
> > Please, turn everything off (volumes and mute controls).
>
> I ran the attached script, which appears to do the job. The amixer output
> is also attached.
>
> > And type
> > this command:
> >
> > amixer sset 'Line LiveDrive',0 capture 100 cap
>
> Didn't work :(
>
> > It should be sufficient. If not, it might be that we have some different
> > names for EMU10K1 inputs. Then could you try these commands
> > (simultaneously, if input works, try determine the right one)?
> >
> > amixer sset 'Line LiveDrive',1 capture 100 cap
> > amixer sset 'IEC958 TTL',0 capture 100 cap
> > amixer sset 'Zoom Video',0 capture 100 cap
> > amixer sset 'IEC958 Optical' capture 100 cap
> > amixer sset 'IEC958 Coaxial' capture 100 cap
> > amixer sset 'Line LiveDrive' capture 100 cap
>
> Didn't work either :(
>
> > AC'97 controls should be off. There's none connection between AC'97
> > and these inputs. Good luck.
>
> I'll bear that in mind.
>
> By the way, and I've no idea if it has any bearing but my snd-emu10k1
> options include snd_extin=0x3fc3 snd_extout=0x1fff.
You may try: snd_extin=0x3fff and try set Zoom Video and IEC958 TTL
controls again to verify, if signal is not there.
Jaroslav
-----
Jaroslav Kysela <[EMAIL PROTECTED]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
