This finally adds support for capturing.
Contrary to what I've written earlier, the mixer controls (capture
selection etc.) *are* supported, because they're on the device's front
panel, not in software. :-)
--- alsa-kernel/usb/usbquirks.h.orig 2003-01-23 18:22:44.785700000 +0100
+++ alsa-kernel/usb/usbquirks.h 2003-01-23 18:38:23.808544000 +0100
@@ -398,6 +398,7 @@
}
},
{
+ /* thanks to Emiliano Grilli <[EMAIL PROTECTED]> for helping researching this
+data */
USB_DEVICE(0x0582, 0x000c),
.driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
.vendor_name = "Roland",
@@ -423,6 +424,23 @@
}
},
{
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = & (const struct audioformat) {
+ .format = SNDRV_PCM_FORMAT_S24_3LE,
+ .channels = 2,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = 0,
+ .endpoint = 0x81,
+ .ep_attr = 0x01,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 44100,
+ .rate_max = 44100,
+ }
+ },
+ {
.ifnum = 2,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = & (const snd_usb_midi_endpoint_info_t) {
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
