On Tue, 28 Jan 2003, Mark J Roberts wrote:
> [ An evil list-moderator bot ate the first version of this. ]
>
> I'm running kernel 2.5.49, built with the generic MPU-401 MIDI
> driver, and booted with the "snd-mpu401=1,-1,,0x300,10" option,
> which corresponds to IO port 0x300 and IRQ 10.
>
> I've configured my BIOS to enable the on-board MIDI interface, and
> set it to port 0x300 and IRQ 10.
>
> I see zero interrupts in /proc/interrupts:
>
> 10: 0 XT-PIC MPU401 UART
>
> So, any ideas?
You've pointed to the reason: hardware does not generate input interrupts.
Try to disable the IRQ (snd-mpu401=1,,,0x300,-1).
Jaroslav
-----
Jaroslav Kysela <[EMAIL PROTECTED]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
