All.
I have been abel to get the audigy 2 card to work with emu10k1 but i have a problem.
I cannot seem to get multichannel sound and the volumes and levels are pretty low.
What I did was:
get the latest emu10k1from cvs
ensure that kernel sources are installed in the right place in /usr/src/
find the right config file for the kernel modules in
/lib/modules/(kernelname)/configs and copy this one level up and name it .config
on the emu10k1 stuff do a make, then make again
then make install
then make tools
then make install-tools
edit the modules.conf file and put the lines
alias sound emu10k1
alias sound-slot-0 emu10k1
alias sound-slot-1 emu10k1
reboot and sound was there.
i might hav had to do a emu-config -a at some stage.
I would also like to know what is sound-slot-0 and sound-slot-1. i.e. what is the
slot all about? and what are the scripts for in /usr/local/etc/ relating to the
emu10k1 and audigy?
Any help would be appreciated.
Mat.
-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and register here for some mind boggling fun and
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
