Torrey Hoffman wrote:
> My .asoundrc at this point closely follows the documentation (with
> corrections as noted in bug#2) and looks like:
>
> pcm.ac97 {
> type hw
> card 0
> device 0
> }
>
> pcm_slave.sl2 {
> pcm ac97
> rate 44100
> }
>
> pcm.rate_convert {
> type rate
> slave sl2
> }
>
> The documentation says:
> "Now you can call this newly created virtual device by: aplay -D
> rate_convert test.wav"
>
> But when I try that, I get this error:
>
> Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
> aplay: set_params:805: Broken configuration for this PCM: no configurations available
>
> Note that "aplay -D ac97 test.wav" works, but plays too fast (at 48000),
> and gives the warning "please, try the plug plugin (-Dplug:ac97)". If I
> do that, it works perfectly.
This example is intended to demonstrate a virtual device that accepts
all sample rates and converts them to 44.1 kHz before playing.
However, it seems your hardware supports 48 kHz only.
I think the example should use 48 instead of 44.1 because that is the
only sample rate guaranteed to be available on AC'97 codecs.
HTH
Clemens
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
