Peter Antypas wrote: > I 've had no luck in using the cvs version with the ad1888 update. > In fact, I can't even load snd-intel8x0. I thought the intel8x0 > module was supposed to work here?
An AC'97 system consists of two components: an AC'97 codec (in your case, the AD1888), and an AC'97 controller (usually part of the southbridge). Your codec is supported, but your controller isn't. > cat /proc/pci reveals a PCI id of 1002:4341 with I/O at 0xfbe00000 > to 0xfbe000ff. It reports the device is (ATI Technologies) (rev 0) > grepping through the CVS source (checked out today) for "1002" or > "4341" reveals nothing. > > I added the PCI ids to snd-intel8x0 and it fails to grab the > specified I/O ports. What could be the problem here? The problem is that ATI's AC'97 controller isn't compatible with Intel's, so snd-intel8x0 doesn't work with it. And it's completely undocumented, so we cannot write a driver for it. Regards, Clemens ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
