Hello!
For EWS64XL (at least for my rev 1.2) you should use cs4236. It worked
for me a couple of weeks ago. In fact, you don't need to initialize
a sam9407 device to use CoDec device with latest ALSA revision.
Uros.
BTW: I'm developing a driver for sam9407 device. I already can
talk and receive responses from sam9407 chip, and PCM/mixer functions can
easily be implemented now. I just returned from business trip, and I will
try to hack on PCM/mixer functions soon.
On Wed, 6 Mar 2002 [EMAIL PROTECTED]
wrote:
> Hello,
>
>
>
> I have a Terratec Audiosystem EWS64XL soundcard that has the sam9407 and
> cs4232 soundchip.
>
> In the past i used the sam9407 drivers from
> http://www.anime.net/~goemon/linux-sam9407/
> together with the snd-card-cs4232 driver from ALSA version 0.5.x.
>
> This combination worked fine.
> The sam9407 driver was started first to initialize the cs4232 (CoDec) chip
> on my soundcard,
> so that the Alsa 0.5.x cs4232 driver could use it.
>
>
>
> But yesterday i switched from Alsa 0.5.x to Alsa 0.9.x but the snd-cs4232
> sounddriver from Alsa 0.9.x could not be loaded.
>
> Alsa 0.9.x doesn't work.
>
>
> Here are some logs, error messages and other infos that could be interesting
> for you:
>
>
>
> Beginning of listing
>
> ------------------
> System: Athlon Classic 500 MHz, ASUS K7M, Terratec Audiosystem EWS64 XL
> Distribution: Slackware 8.0
> Kernel Version: Linux-2.4.18
> Soundrivers: sam9407-1.0.0 and alsa-driver-0.9.0beta12 +
> alsa-oss-0.9.0beta11
> Soundchips on Soundcard: sam9407 and CS4232 (cs4232 is initialized via
> sam9407
> driver)
>
>
>
> --------------
> $ ./configure --with-oss=yes --with-cards=cs4232,dummy,mpu401
> --with-sequencer=no --with-isapnp=no --with-debug=full
> and
> $ ./configure --with-oss=yes --with-cards=cs4232,dummy,mpu401
> --with-sequencer=yes --with-isapnp=yes --with-debug=detect
> With-isapnp yes or no, there is no diference. Driver doesn't load/work.
>
>
>
>
>
> -------------------------------
> $ modprobe snd-cs4232
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: init_module: No
> such
> device
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: Hint: insmod
> errors
> can be caused by incorrect module parameters, including invalid IO or IRQ
> parameters
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: insmod
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o failed
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: insmod snd-cs4232
> failed
> $
>
>
>
>
> ----------------------------
> $ insmod snd-cs4232
> Using /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_cs4231_timer_Rd7b3a479
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_opl3_create_R7cfd1ec5
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_opl3_hwdep_new_R0cd48230
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_cs4231_mixer_Rb6145477
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_cs4231_pcm_R6e831eea
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_mpu401_uart_new_R606a10b8
> /lib/modules/2.4.18/kernel/sound/isa/cs423x/snd-cs4232.o: unresolved symbol
> snd_cs4231_create_R1b369888
> $
>
>
>
>
> -------------------------
> $ cat /var/log/syslog
> Mar 6 00:52:54 blackbox kernel: CS4232 soundcard not found or device busy
> Mar 6 00:56:41 blackbox kernel: CS4232 soundcard not found or device busy
> Mar 6 00:56:53 blackbox modprobe: modprobe: Can't locate module
> char-major-10-134
> Mar 6 00:56:54 blackbox modprobe: modprobe: Can't locate module
> char-major-81-1
> Mar 6 00:57:49 blackbox kernel: CS4232 soundcard not found or device busy
> $
>
>
>
>
> -------------------------
> $ cat /proc/asound/sndstat
> Sound Driver:3.8.1a-980706 (ALSA v0.9.0beta12 emulation code)
> Kernel: Linux blackbox 2.4.18 #3 Tue Mar 5 22:14:43 CET 2002 i686
> Config options: 0
>
> Installed drivers:
> Type 10: ALSA emulation
>
> Card config:
> --- no soundcards ---
>
> Audio devices: NOT ENABLED IN CONFIG
>
> Synth devices: NOT ENABLED IN CONFIG
>
> Midi devices: NOT ENABLED IN CONFIG
>
> Timers:
> 7: system timer
>
> Mixers: NOT ENABLED IN CONFIG
> $
>
>
>
>
> ---------------------
> $ cat /dev/sam0_sndstat
> driver: sam9407-1.0.0
> soundcard: ews64xl
> firmware: ews64
> have-audio: yes
> have-midi: yes
> have-mod: yes
> memory-total: 6144k
> memory-free: 2315k
> memory-sbank: 3691k
> memory-mod: 0k
> memory-audio: 0k
> channels-play: 0/32
> channels-rec: 0/1
> $
>
>
>
>
>
>
> -------------------------
> $ cat /etc/modules.conf
> alias char-major-145 sam9407
> alias /dev/sam9407 sam9407
> alias net-pf-4 off # we won't use PF IPX
> alias net-pf-5 off # we won't use PF AppleTalk
>
> # sam9407 is activated via /etc/rc.d/rc.modules
> # modprobe sam9407
>
> # Alsa portion
> alias char-major-116 snd
> options snd snd_major=116 snd_cards_limit=1
>
> #
> # I M P O R T A N T !!!!
> #
> #---sam9407 and alsa Version 0-5.x works fine with this options: !!!!!!!!!
> (alsa 0.9.x does not)
> #alias snd-card-0 snd-card-cs4232
> #options snd-card-cs4232 snd_index=0 snd_id=card0 \
> # snd_port=0x534 snd_cport=0x538 snd_irq=5 snd_dma1=0 \
> # snd_dma2=1 snd_mpu_port=-1 snd_fm_port=0x388
>
> #---alsa 0.9.x: ("snd-card-cs4232" changed to "snd-cs4232")
> alias snd-card-0 snd-cs4232
> options snd-cs4232 snd_index=0 snd_id=card0 \
> snd_port=0x534 snd_cport=0x538 snd_irq=5 snd_dma1=0 \
> snd_dma2=1 snd_mpu_port=-1 snd_fm_port=0x388
>
> # snd_isapnp=1 \
> # snd_cport=0x538 snd_mpu_port=-1 snd_fm_port=0x388 \
> # snd_irq=5 snd_dma1=0 snd_dma2=1 \
> # snd_jport=-1
>
>
> # OSS/Free portion
> # alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
>
> # post-install snd-mixer /usr/sbin/alsactl restore
>
>
>
>
>
>
>
> -----------------------------
> Small part of /etc/rc.d/rc.modules:
>
> /sbin/sam9407 -s
>
> # ALSA 0.5.x (as said above 0.5.x works!)
> #/sbin/modprobe snd-card-cs4232
>
> # ALSA 0.9.x
> /sbin/modprobe snd-cs4232
>
> /sbin/modprobe snd-mixer-oss
> /sbin/modprobe snd-pcm-oss
> /sbin/modprobe snd-seq-oss
> /usr/sbin/alsactl restore
>
>
>
>
>
>
> -----------------------
> $ cat /etc/isapnp.conf
> # $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
> # Release isapnptools-1.21 (library isapnptools-1.21)
> #
> # This is free software, see the sources for details.
> # This software has NO WARRANTY, use at your OWN RISK
> #
> # For details of the output file format, see isapnp.conf(5)
> #
> # For latest information and FAQ on isapnp and pnpdump see:
> # http://www.roestock.demon.co.uk/isapnptools/
> #
> # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
> # (for library: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
> #
> # Trying port address 0273
> # Board 1 has serial identifier 1d 97 b0 3c 58 36 a8 63 0e
>
> # (DEBUG)
> (READPORT 0x0273)
> (ISOLATE PRESERVE)
> (IDENTIFY *)
> (VERBOSITY 2)
> (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
>
> # Card 1: (serial identifier 1d 97 b0 3c 58 36 a8 63 0e)
> # Vendor Id CSCa836, Serial Number 2544909400, checksum 0x1D.
> # Version 1.0, Vendor version 1.0
> # ANSI string -->AudioSystem EWS64<--
> #
> # Logical device id CSCa800
> # Device supports vendor reserved register @ 0x38
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3d
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 0
> # ANSI string -->CoDec<--
>
> # Multiple choice time, choose one only !
>
> # Start dependent functions: priority preferred
> # IRQ 5.
> # High true, edge sensitive interrupt (by default)
> (INT 0 (IRQ 5 (MODE +E)))
> # First DMA channel 1.
> # 8 bit DMA only
> # Logical device is not a bus master
> # DMA may execute in count by byte mode
> # DMA may not execute in count by word mode
> # DMA channel speed type B
> (DMA 0 (CHANNEL 1))
> # Next DMA channel 0.
> # 8 bit DMA only
> # Logical device is not a bus master
> # DMA may execute in count by byte mode
> # DMA may not execute in count by word mode
> # DMA channel speed type B
> (DMA 1 (CHANNEL 0))
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0534
> # Maximum IO base address 0x0534
> # IO base alignment 4 bytes
> # Number of IO addresses required: 4
> (IO 0 (SIZE 4) (BASE 0x0534))
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0388
> # Maximum IO base address 0x0388
> # IO base alignment 8 bytes
> # Number of IO addresses required: 4
> (IO 1 (SIZE 4) (BASE 0x0388))
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0220
> # Maximum IO base address 0x0220
> # IO base alignment 32 bytes
> # Number of IO addresses required: 16
> (IO 2 (SIZE 16) (BASE 0x0220))
>
> # End dependent functions
> (NAME "CSCa836/2544909400[0]{CoDec }")
> (ACT Y)
> ))
> #
> # Logical device id CSCa801
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3b
> # Device supports vendor reserved register @ 0x3f
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 1
> # ANSI string -->Game Port<--
>
> # Multiple choice time, choose one only !
>
> # Start dependent functions: priority preferred
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0201
> # Maximum IO base address 0x0201
> # IO base alignment 1 bytes
> # Number of IO addresses required: 1
> (IO 0 (SIZE 1) (BASE 0x0201))
>
> # End dependent functions
> (NAME "CSCa836/2544909400[1]{Game Port }")
> (ACT Y)
> ))
> #
> # Logical device id CSCa810
> # Device supports vendor reserved register @ 0x38
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3b
> # Device supports vendor reserved register @ 0x3f
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 2
> # ANSI string -->CTRL<--
>
> # Multiple choice time, choose one only !
>
> # Start dependent functions: priority preferred
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0538
> # Maximum IO base address 0x0538
> # IO base alignment 8 bytes
> # Number of IO addresses required: 8
> (IO 0 (SIZE 8) (BASE 0x0538))
>
> # End dependent functions
> (NAME "CSCa836/2544909400[2]{CTRL }")
> (ACT Y)
> ))
> #
> # Logical device id CSCa8a3
> # Device supports vendor reserved register @ 0x38
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3b
> # Device supports vendor reserved register @ 0x3f
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 3
> # ANSI string -->Disabled [MIDI-2]<--
> (NAME "CSCa836/2544909400[3]{Disabled [MIDI-2] }")
> # (ACT Y)
> ))
> #
> # Logical device id CSC9407
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3b
> # Device supports vendor reserved register @ 0x3f
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 4
> # ANSI string -->Synth<--
>
> # Multiple choice time, choose one only !
>
> # Start dependent functions: priority preferred
> # IRQ 9.
> # High true, edge sensitive interrupt (by default)
> (INT 0 (IRQ 9 (MODE +E)))
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0330
> # Maximum IO base address 0x0330
> # IO base alignment 8 bytes
> # Number of IO addresses required: 4
> (IO 0 (SIZE 4) (BASE 0x0330))
>
> # End dependent functions
> (NAME "CSCa836/2544909400[4]{Synth }")
> (ACT Y)
> ))
> #
> # Logical device id CSCa805
> # Device supports vendor reserved register @ 0x39
> # Device supports vendor reserved register @ 0x3a
> # Device supports vendor reserved register @ 0x3b
> # Device supports vendor reserved register @ 0x3f
> #
> # Edit the entries below to uncomment out the configuration required.
> # Note that only the first value of any range is given, this may be changed
> if
> required
> # Don't forget to uncomment the activate (ACT Y) when happy
>
> (CONFIGURE CSCa836/2544909400 (LD 5
> # ANSI string -->Digital CTRL<--
>
> # Multiple choice time, choose one only !
>
> # Start dependent functions: priority preferred
> # Logical device decodes 16 bit IO address lines
> # Minimum IO base address 0x0100
> # Maximum IO base address 0x03f8
> # IO base alignment 8 bytes
> # Number of IO addresses required: 1
> (IO 0 (SIZE 1) (BASE 0x0100))
>
> # End dependent functions
> (NAME "CSCa836/2544909400[5]{Digital CTRL }")
> (ACT Y)
> ))
> # End tag... Checksum 0x00 (OK)
>
> # Returns all cards to the "Wait for Key" state
> (WAITFORKEY)
>
>
>
>
> -----------------------------------
> $ cat /proc/devices
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 vc/0
> 5 ptmx
> 6 lp
> 7 vcs
> 10 misc
> 13 input
> 14 sound
> 21 sg
> 81 video_capture
> 108 ppp
> 116 alsa
> 128 ptm
> 136 pts
> 145 sam9407
> 162 raw
> 180 usb
> 226 drm
>
> Block devices:
> 2 fd
> 3 ide0
> 7 loop
> 11 sr
> 22 ide1
>
>
>
> ------------------------
> $ cat /proc/dma
> 4: cascade
>
>
>
> -------------------------------
> $ cat /proc/interrupts
> CPU0
> 0: 274324 XT-PIC timer
> 1: 9246 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 3: 2 XT-PIC bttv, btaudio
> 8: 1 XT-PIC rtc
> 9: 5319 XT-PIC sam9407 (EWS64XL)
> 10: 0 XT-PIC usb-uhci, usb-uhci, eth0
> 12: 83895 XT-PIC PS/2 Mouse
> 14: 8945 XT-PIC ide0
> 15: 16 XT-PIC ide1
> NMI: 0
> LOC: 0
> ERR: 0
> MIS: 0
>
> -> With alsa 0.5.x cs4232 soundchip (also known as codec) uses IRQ 5,
> Sam9407
> uses allways IRQ 9.
>
>
>
> -------------------------------
> $ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0100-0101 : sam9407 (EWS64XL Dig. Ctrl)
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0213-0213 : isapnp read
> 0330-0333 : sam9407 (EWS64XL)
> 0376-0376 : ide1
> 0378-037a : parport0
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 0400-040f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0800-08ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0a79-0a79 : isapnp write
> 0cf8-0cff : PCI conf1
> a000-afff : PCI Bus #01
> cc00-ccff : Realtek Semiconductor Co., Ltd. RTL-8139
> cc00-ccff : 8139too
> d000-d01f : VIA Technologies, Inc. UHCI USB
> d000-d01f : usb-uhci
> d400-d41f : VIA Technologies, Inc. UHCI USB (#2)
> d400-d41f : usb-uhci
> d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
> Controller
> dc00-dcff : 3Dfx Interactive, Inc. Voodoo 3
> ffa0-ffaf : VIA Technologies, Inc. Bus Master IDE
> ffa0-ffa7 : ide0
> ffa8-ffaf : ide1
>
>
>
>
> -----------------------------------
> $ cat /proc/isapnp
> Card 1 'CSCa836:AudioSystem EWS64' PnP version 1.0 Product version 1.0
> Logical device 0 'CSCa800:CoDec'
> Device is active
> Active port 0x534,0x388,0x220
> Active IRQ 5 [0x2]
> Active DMA 1,0
> Resources 0
> Priority preferred
> Port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
> Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
> Port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding
> IRQ 5 High-Edge
> DMA 1 8-bit master byte-count type-F
> DMA 0 8-bit master byte-count type-F
> Logical device 1 'CSCa801:Game Port'
> Device is active
> Active port 0x201
> Resources 0
> Priority preferred
> Port 0x201-0x201, align 0x0, size 0x1, 16-bit address decoding
> Logical device 2 'CSCa810:CTRL'
> Device is active
> Active port 0x538
> Resources 0
> Priority preferred
> Port 0x538-0x538, align 0x7, size 0x8, 16-bit address decoding
> Logical device 3 'CSCa8a3:Disabled [MIDI-2]'
> Device is not active
> Logical device 4 'CSC9407:Synth'
> Device is active
> Active port 0x330
> Active IRQ 9 [0x2]
> Resources 0
> Priority preferred
> Port 0x330-0x330, align 0x7, size 0x4, 16-bit address decoding
> IRQ 2/9 High-Edge
> Logical device 5 'CSCa805:Digital CTRL'
> Device is active
> Active port 0x100
> Resources 0
> Priority preferred
> Port 0x100-0x3f8, align 0x7, size 0x1, 16-bit address decoding
>
> -> Remember, cs4232 is also called "CoDec" on the EWS64 XL soundcard.
>
>
>
>
> -----------------------------------
> $ cat /proc/modules
> iptable_filter 1744 1 (autoclean)
> snd-seq-oss 25280 0 (unused)
> snd-seq-midi-event 2944 0 [snd-seq-oss]
> snd-seq 44528 2 [snd-seq-oss snd-seq-midi-event]
> snd-seq-device 4544 0 [snd-seq-oss snd-seq]
> snd-pcm-oss 46816 0 (unused)
> snd-pcm 62752 0 [snd-pcm-oss]
> snd-timer 13040 0 [snd-seq snd-pcm]
> snd-mixer-oss 11632 0 [snd-pcm-oss]
> snd 34800 0 [snd-seq-oss snd-seq-midi-event snd-seq
> snd-seq-device snd-pcm-oss snd-pcm snd-timer snd-mixer-oss]
> sam9407 110720 0 (autoclean)
> ppp_deflate 39952 0 (unused)
> rtc 5600 0 (autoclean)
>
>
>
>
> -----------------------------------
> $ cat /proc/pci
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System
> Controller (rev 35).
> Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
> Prefetchable 32 bit memory at 0xebdff000 [0xebdfffff].
> I/O at 0xd800 [0xd803].
> Bus 0, device 1, function 0:
> PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge
> (rev
> 1).
> Master Capable. Latency=64. Min Gnt=6.
> Bus 0, device 4, function 0:
> ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
> 20).
> Bus 0, device 4, function 1:
> IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> Master Capable. Latency=32.
> I/O at 0xffa0 [0xffaf].
> Bus 0, device 4, function 3:
> USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 6).
> IRQ 10.
> Master Capable. Latency=64.
> I/O at 0xd400 [0xd41f].
> Bus 0, device 4, function 2:
> USB Controller: VIA Technologies, Inc. UHCI USB (rev 6).
> IRQ 10.
> Master Capable. Latency=64.
> I/O at 0xd000 [0xd01f].
> Bus 0, device 4, function 4:
> SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 16).
> Bus 0, device 13, function 0:
> VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
> IRQ 11.
> Non-prefetchable 32 bit memory at 0xee000000 [0xefffffff].
> Prefetchable 32 bit memory at 0xe8000000 [0xe9ffffff].
> I/O at 0xdc00 [0xdcff].
> Bus 0, device 15, function 0:
> Multimedia video controller: Brooktree Corporation Bt878 (rev 2).
> IRQ 3.
> Master Capable. Latency=64. Min Gnt=16.Max Lat=40.
> Prefetchable 32 bit memory at 0xebdfd000 [0xebdfdfff].
> Bus 0, device 15, function 1:
> Multimedia controller: Brooktree Corporation Bt878 (rev 2).
> IRQ 3.
> Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
> Prefetchable 32 bit memory at 0xebdfe000 [0xebdfefff].
> Bus 0, device 16, function 0:
> Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
> IRQ 10.
> Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
> I/O at 0xcc00 [0xccff].
> Non-prefetchable 32 bit memory at 0xedfeff00 [0xedfeffff].
>
>
>
>
> -----------------------------
>
> End of listing.
>
>
>
> Hope you can tell me what went wrong.
>
>
> Best Regards,
> Oliver C.
>
>
> --
> GMX - Die Kommunikationsplattform im Internet.
> http://www.gmx.net
>
>
> _______________________________________________
> Alsa-devel mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
