OK, here is -xvv for that controller.
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev
30)
Subsystem: VIA Technologies, Inc.: Unknown device 4511
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at ec00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 59 30 01 00 10 02 30 00 01 04 00 00 00 00
10: 01 ec 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 11 45
30: 00 00 00 00 c0 00 00 00 00 00 00 00 0b 03 00 00
and here is the -nvv
00:11.5 Class 0401: 1106:3059 (rev 30)
Subsystem: 1106:4511
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at ec00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
When I was using it, a stereo sample did play on both channels, from
the cd, from pcm, they were mono -- I didn't test with stereo for the
pcm. Is this sound card a multi channel and if so, how do I use more
than one channel?
on Thursday 06/27/2002 Takashi Iwai([EMAIL PROTECTED]) wrote
> Hi,
>
> At Wed, 26 Jun 2002 16:44:58 -0400,
> John covici wrote:
> >
> > Here is what I get from the lspci -- I don't think that the via8233
> > is multi-channel at all and I didn't see any controls to utilize such
> > a thing in my asound.state file.
>
> in fact via8233 has capability to output up to 6 channels (and spdif),
> although most of motherboards have only two output channels.
>
> the difference is only the implementation of the driver, so no change
> will appear on /etc/asound.state.
> the channels are configured dynamically according to the requested
> channels of pcm.
>
>
> > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
> > Controller (rev 30)
> >
> > I can send you the verbose version if that would help.
> >
>
> yes, could you get more detailed info with -xvv and -nvv options?
>
> and, please recheck under which condition this happens,
> whether with the stereo samples or with the mono samples, or
> whatever.
>
> i can revert the codes only for certain chip models.
> since via8233 has _only_ multi-channel playback mode, it must use
> this. but other chip models have another mode, which was used by the
> old driver. this can be enabled conditionally by checking the chip
> revision number.
>
>
> Takashi
--
John Covici
[EMAIL PROTECTED]
-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
