I'm seeing a problem with using JACK and this usb soundcard.
JACK works with this card on all pcm devices seperately but AFAICT is
not able to access 2 pcm devices on this card at the same time.
This card has 3 stereo pcm devices.
hw:2,0 - capable of upto 16/44100
hw:2,1
hw:2,2 - capable of upto 24_3LE/96000
No matter what I try with .asoundrc I cannot get JACK to see 2 stereo
i/o at one time. It hangs on startup.
I think it is because the devices 2,0 and 2,1 point to the same physical
i/o channels and Jack is being blocked by ALSA from accessing them at
the same time.
Is there anyway to change the order of the pcm devices so that
2,0 -> 2,2
2,1 -> 2,0
2,2 -> 2,1
If not is there anyway I can specify in the following that
bindings.0.slave.a is hw:2,1 instead of hw:2,0?
----
pcm.quattro {
type multi;
slaves.a.pcm "hw:2,0";
slaves.a.channels 3;
bindings.0.slave a;
bindings.0.channel 0;
bindings.1.slave a;
bindings.1.channel 1;
bindings.2.slave a;
bindings.2.channel 2;
}
ctl.quattro {
type hw;
card 0;
}
----
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
