hey, on http://hal9000.drehmoment.org/tascam/ you can download a patch against cvs of august 14. it contains:
- snd-usb-us428 downloads firmware to endpoint 2. creates 2 midi devices through the patched snd-usb-midi and 2 input + 1 output pcm devices. - snd-usb-midi with exports same as before ( i hope...), except added exports to make it callable by snd-usb-us428. Clemens and Takashi: you think its ok, or is there a better way? - snd-usb-us428-dl firmware for a coldly booted us-428. this driver's task can shurely be done by a generic ez-usb firmware-loader. for now it is needed to prepare the us-428 for the snd-usb-us428 module. midi & audio work i.e. with the bristol-synths (44100 & 48000 S16_LE). the us-428 control's messages are only printked except for the master volume slider, which is functional. the firmware and usb messages have been sniffed from the win2k 3.09 driver with an improved version of sniffusb 1.5. (there has been no support from tascam so far) should you like to sniff, i'll mail the sniffer to you. there are still some things to improve like - mapping the controls messages to midi messages - stearing the leds by midi messages - enhancing audio (24bit (possible by simply using altsetting 2), input monitoring) cheers, karsten __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
