Eugenio Diaz <[EMAIL PROTECTED]> writes: > > > Fresh install today of latest Cooker on a notebook with CS46xx > > > sound chipset. > > > > > > As reported earlier, because of OSS drivers - I get a double > > > (echo) sound. I want to switch to Alsa but there is not easy way > > > to do it (through harddrake2 or sndconfig) > > > > > > What's the recommended way to switch between OSS and Alsa? > > > > send me the output of "lspcidrake -v" and the alsa module to use, > > and i'll alter the pcitable. > > The only problem being that this is a 4-channel card, and alsa > supports only 2 while OSS supports all 4 channels! > > I remember exchanging emails with you about this, and the problem > where the mixer control labels for the front channels and the main > volume were reversed, back in early June. Back then you forwarded > the problem to jaroslav (alsa main developer and snd-cs46xx author), > but the problems are still there ... > > I am still using OSS just because it supports the 4-channels, and > that makes a big difference; but I have to remove and reload the > modules every now and then (like once every two days) because the > sound gets corrupted.
Jaroslav ? ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
