On Wed, 2002-10-23 at 14:00, Clemens Ladisch wrote: > I assumed that you wanted to use a Quattro and a UC16 together. In this > case, you need one entry for each card, although they're handled by the > same driver. > > The snd-card-x entries are used for autoloading: when you try to access > PCM device hw:x,y and this device doesn't yet exist, ALSA knowns that it > should load the driver specified by snd-card-x.
thanks, that helps a lot... as you can guess i'm new-ish to working with alsa although not so new to linux sound... bw m -- iriXx www.iriXx.org copyleft: creativity, technology and freedom? [EMAIL PROTECTED] www.copyleftmedia.org.uk _ ( ) ascii ribbon against html email X / \ cat /dev/sda1 > /dev/dsp *** stopping make sense *** ------------------------------------------------------- This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now. http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel