On Mon, 11 Nov 2002, Benny Sjostrand wrote:
> >
> >
> >------------------------------------------------------------------------
> >
> >Ok, that's fixed the bass problem I had here.
> >One thing though. Benny, do you have any idea what these values "should"
> >be?
> >
> >
> But I still dont understand the problem. And reports are not at all
> consequent ...
>
> >iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
> >
> >
> I guess you need to add in .asoundrc:
> iec958 {
> type hw
> card 0
> device 2
> }
>
> Then maybe someone knows what xine uses the
> AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 values to,
> do they need to interfaces to the lowlevel driver ???
It's first 32-bits to setup the channel status block in the S/PDIF
stream. The main job is to tell the remote receiver, that data are
'non-audio' (bit 1 = 1).
Jaroslav
-----
Jaroslav Kysela <[EMAIL PROTECTED]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
