Ok, I've now tried both the 0.9.0rc6 and just built the latest
version from cvs, neither module works. I am running Slackware and
have compiled both the 2.4.20 (SMP) kernel and the modules using the
standard 2.95.3 20010315 (release) gcc.
"lspci -v" gives:
02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 8077
Flags: bus master, stepping, medium devsel, latency 32
I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
With "modprobe snd-cmipci" I get:
/lib/modules/2.4.20/kernel/sound/pci/snd-cmipci.o: init_module: No such device
various "ls -ld /dev/dsp" gives:
jolt# ls -ld /dev/dsp
lrwxrwxrwx 1 root root 9 Nov 30 21:52 /dev/dsp -> /dev/dsp0
jolt# ls -ld /dev/dsp0
crw-rw-rw- 1 root root 14, 3 Nov 30 21:52 /dev/dsp0
jolt# ls -ld /dev/dsp1
crw-rw-rw- 1 root root 14, 19 Nov 30 21:52 /dev/dsp1
The standard kernel cmpci.o module will load,
but doesn't provide an openable /dev/dsp.
Any ideas? I'll provide any further information, if needed.
It works fine under Windows 2000.
--friar
-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
