Hi Benny, At Mon, 09 Dec 2002 01:12:09 +0100, Benny Sjostrand wrote: > > Hi! > > In this patch the phase problems should be gone, if still think that you > got "phase reversal" problem > please sendme a dump of the /proc/asound/card0/dsp/sample content while > you are playbacking > whatever giving you "phase reversal" problem. > > On the AC3 front I've managed to get my receiver to switch on to > "Digital Surround" mode (instead of PCM), which > must mean that it finally detected the AC3 stream. But still no sound, > got no idea why, but please if you > have time give it a test. > > Consider this patch as "experimental", just in the mean, dont be > surprised if something that worked > OK before is now broken. > > Summar of changes: > - Phase reversal fixes. > - Some rewrites on playback code, related to the sample rate setup. > - AC3 stuff ....
thanks! now committed on cvs. the spdif output on my terratec x-fire seems working fine now, at least for the normal playback. however, if i stop the playback in the middle, it results in a constant beep. does happen on another card? also, ac3dec seems not working yet on the card. this could be due to another reason, though. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
