I want to make a simple OPL3 beeper, but I'm stuck with
snd_hwdep_open(), I just don't know what string I should call it with.
pupilla:~$ cat /proc/asound/cards
0 [CARD_0 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xb800, irq 9
pupilla:~$ cat /proc/asound/hwdep
00-00: OPL3 FM
pupilla:~$ cat /proc/asound/devices
0: [0- 0]: ctl
8: [0- 0]: raw midi
18: [0- 2]: digital audio playback
26: [0- 2]: digital audio capture
17: [0- 1]: digital audio playback
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
4: [0- 0]: hardware dependent
1: : sequencer
33: : timer
I've tried lots of combinations, but it always fail... :-(
--
Saluti,
Mardy
http://castellina.org/interlingua
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
