> At Mon, 23 Jun 2003 23:54:46 -0700, > [EMAIL PROTECTED] wrote: > > > > > At Sun, 22 Jun 2003 20:45:09 -0700, > > > [EMAIL PROTECTED] wrote: > > > > > > > > > > > > Am attempting to get linux-2.5.72 + snd-usb-audio happening.
> > > please try the cvs version. > > Takashi > ALSA cvs + linux-2.5.72-mm3 ----------------- Startup and jackd start - dmesg jackd --tmpdir=/mnt/ramfs -v -d alsa -d usb-audio:0,0 -r 44100 ---------------------------- ehci_hcd 0000:00:10.3: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT hub 1-0:0: port 1, status 501, change 1, 480 Mb/s hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 hub 1-0:0: port 1 not reset yet, waiting 10ms hub 1-0:0: port 1 not reset yet, waiting 10ms ehci_hcd 0000:00:10.3: port 1 full speed --> companion ehci_hcd 0000:00:10.3: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT drivers/usb/host/uhci-hcd.c: d400: wakeup_hc hub 2-0:0: port 1, status 101, change 1, 12 Mb/s hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 2-0:0: new USB device on port 1, assigned address 3 usb 2-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 2-1: Product: USB Audio drivers/usb/core/usb.c: usb_hotplug usb 2-1: usb_new_device - registering interface 2-1:0 drivers/usb/core/usb.c: usb_hotplug snd-usb-audio 2-1:0: usb_device_probe snd-usb-audio 2-1:0: usb_device_probe - got id drivers/usb/core/usb.c: snd-usb-audio driver claimed interface c132652c drivers/usb/core/usb.c: snd-usb-audio driver claimed interface c1326658 usb 2-1: usb_new_device - registering interface 2-1:1 drivers/usb/core/usb.c: usb_hotplug usb 2-1: usb_new_device - registering interface 2-1:2 drivers/usb/core/usb.c: usb_hotplug ALSA sound/usb/usbaudio.c:685: cannot submit datapipe for urb 0, err = -22 ---------------------------------------- jackd -------------------------------------- JACK compiled with System V SHM support running with uid=500 and euid=0, will not try to use capabilites 1277 waiting for signals loading driver .. new client: alsa_pcm, id = 1 type 1 @ 0x80580e8 fd = -1 creating alsa driver ... usb-audio:0,0|1024|2|44100|swmon|swmeter|rt open port alsa_pcm:capture_1 has mixdown = 0x40017e70 registered port alsa_pcm:capture_1, offset = 4096 port alsa_pcm:capture_2 has mixdown = 0x40017e70 registered port alsa_pcm:capture_2, offset = 8192 port alsa_pcm:playback_1 has mixdown = 0x40017e70 registered port alsa_pcm:playback_1, offset = 0 port alsa_pcm:playback_2 has mixdown = 0x40017e70 registered port alsa_pcm:playback_2, offset = 0 ++ jack_rechain_graph(): client alsa_pcm: internal client, execution_order=0. -- jack_rechain_graph() starting engine ALSA lib pcm_hw.c:494:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe could not start playback (Broken pipe) ---------------------------------- aplay -D usb-audio:0,0 Peak.wav Playing WAVE 'Peek.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:810: Channels count non available --------------------------------------- ALSA sound/usb/usbaudio.c:685: cannot submit datapipe for urb 0, err = -22 ------------------------------------------ cliffw ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
