At Mon, 13 Oct 2003 14:28:04 +0200 (METDST),
Clemens Ladisch wrote:
>
> Juan Linietsky wrote:
> > I cant seem to get the joystick port to run under this card (Ensoniq 1371)
> > under alsa 0.9.rc6.
>
> You might have better luck with 0.9.7c.
>
> > state.AudioPCI {
> > control.1 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface CARD
> > name 'Joystick Enable'
> > value true
> > }
> > control.2 {
> > comment.access 'read write'
> > comment.type ENUMERATED
> > comment.item.0 'port 0x200'
> > comment.item.1 'port 0x208'
> > comment.item.2 'port 0x210'
> > iface CARD
> > name 'Joystick Address'
> > value 'port 0x200'
> > }
> >
> > I tried using all the values above, but nothing works, and higher values are
> > ignored (error is reported).
>
> The driver cannot change the gameport's port address while it's
> enabled, so you have to disable the joystick, then change the port,
> then enable it again.
i'm working on taking the joystick stuffs back to the module
parameters again. will be finished in a couple of days.
keep tuned.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
