Hi,
I can't get module emu10k1 to load with 0.9.8. It compiles fine, but
when I try modprobe snd-emu10k1, I get:
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
insmod
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o
failed
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
insmod snd-emu10k1 failed
Here is the insmod output:
Using
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol snd_hwdep_new_R87e4a6ea
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol snd_util_memhdr_new_R86b9ead1
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol __snd_util_mem_alloc_Raf5d58ef
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol __snd_util_memblk_new_R970b7c65
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol __snd_util_mem_free_R74f21f45
/lib/modules/2.4.22-1.2115.nptl/kernel/sound/pci/emu10k1/snd-emu10k1.o:
unresolved symbol snd_util_memhdr_free_Rd52ead8c
And of course, the device does exist, here is lspci -vv:
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Running Fedora Core 1. Any guidance would be appreciated!
Thanks,
Scott
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
