At Wed, 03 Dec 2003 15:47:23 +0100, Thomas Charbonnel wrote: > > Takashi Iwai wrote : > > >>Takashi, I applied your patch but nothings shows up in my logs. > >>I even replaced all the KERN_DEBUG by KERN_EMERG, and still nothing. > >>The only thing I get is this : > >>ALSA intel8x0.c:568: codec_semaphore: semaphore is not ready [0x1][0x300100] > >>ALSA intel8x0.c:599: codec_read 0: semaphore is not ready for register 0x56 > > > > > > and the driver still works somehow? > > > > > >>Is it possible that your code never gets called ? > > > > > > if the driver works, it must not happen. > > > > > > Takashi > > Ok, my fault, sorry Takashi, I stupidly reloaded only the snd-intel8x0 > module and forgot snd-ac97-codec, here's the log : > > ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198 > setting ac97 reg 0x2c to rate 48000 > setting ac97 reg 0x2e to rate 48000 > ALSA ../../alsa-kernel/pci/ac97/ac97_pcm.c:561: error in > snd_ac97_set_rate: cidx=0, reg=0x2e, rate=48000 > , err=-22<0>ac97_pcm_open: rate = 48000, cfg = 2, slots = 0x198 > > (The file's rate was 44100 kHz)
didn't you get any messages before this? it should be something like checking codec 0, slot = 0xxx / 0xxx probing pcm 0 .... Takashi ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel