On Sun, Mar 14, 2004 at 06:21:32PM +0100, Jaroslav Kysela wrote: | > Hm... I tried that but it doesn't work - still sound only out of the front speakers with | > xmms and the duplicate output device. Do I need anything else? | | If you have volumes up, then it should work. | | What does say command 'aplay -v -Dduplicate <somefile>'?
------------------------------ [EMAIL PROTECTED] andreas $ aplay -v -Dduplicate /usr/kde/3.2/share/sounds/KDE_Startup_new.wav Playing WAVE '/usr/kde/3.2/share/sounds/KDE_Startup_new.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo Plug PCM: Linear conversion PCM (S32_LE) Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 22050 exact rate : 22050 (22050/1) msbits : 16 buffer_size : 11024 period_size : 2756 period_time : 124988 tick_time : 1000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 2756 xfer_align : 2756 start_threshold : 11024 stop_threshold : 11024 silence_threshold: 0 silence_size : 0 boundary : 1444937728 Slave: Route conversion PCM Transformation table: 0 <- 0 1 <- 1 2 <- 4 3 <- 5 4 <- 2 5 <- 3 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 22050 exact rate : 22050 (22050/1) msbits : 32 buffer_size : 11024 period_size : 2756 period_time : 124988 tick_time : 1000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 2756 xfer_align : 2756 start_threshold : 11024 stop_threshold : 11024 silence_threshold: 0 silence_size : 0 boundary : 1444937728 Slave: Hardware PCM card 0 'Terratec Aureon 5.1-Sky' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S32_LE subformat : STD channels : 2 rate : 22050 exact rate : 22050 (22050/1) msbits : 24 buffer_size : 11024 period_size : 2756 period_time : 124988 tick_time : 1000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 2756 xfer_align : 2756 start_threshold : 11024 stop_threshold : 11024 silence_threshold: 0 silence_size : 0 boundary : 1444937728 ----------------------------------------- To tell the truth, I'm totally confused by all the different postings and answers, now... *headshaking* To summarize (please correct me if I'm wrong): If I have a stereo source I have to mix up or route the two channels to all of the six channels. This is done with the route and ttable config I posted and should also be possible with your duplicate setup. If I have a real surround source I have to use the surround51 device, perhaps also with your duplicate config ??? Thanks a lot for your patience! Andreas ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
