At Wed, 19 May 2004 13:19:10 +0200, Peter Zubaj wrote: > > Hi, > > >in the case of 16-bit stereo, CPF_STEREO_MASK is used to toggle this > >mode. so, there must be a similar register switch for 32-bit mode. > >otherwise it can't work... > > AFAIK there is not such register. > > If there will be some alsalib plugin which will accept stereo 24bit > stream and split this stream to four (or 3) 16 bit mono streams.
this wouldn't be difficult at all. > These 4 (or 3) streams can be then feeded to 4 (or 3) FX buses > definied similiar as front, rear devices in .asoundrc or Audigy.conf. > > 24 bit left sample -> 16 bit stream 1 + 8bit stream 2 > 24 bit right sample -> 16 bit stream 3 + 8bit stream 4 > > or > > 24 bit left sample -> 16 bit stream 1 + 8bit stream 2 (low) > 24 bit right sample -> 16 bit stream 3 + 8bit stream 2 (high) the question is which FX bus corresponds to what? Takashi ------------------------------------------------------- This SF.Net email is sponsored by: SourceForge.net Broadband Sign-up now for SourceForge Broadband and get the fastest 6.0/768 connection for only $19.95/mo for the first 3 months! http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel