andrew cooke wrote: > > First, thanks very much for replying - this has been so frustrating so far! > More details below. > > On Thursday 01 Jan 1970 12:59 am, you wrote: > > What is the output of cat /proc/asound/sndstat ? > > see below - doesn't look very healthy (but the bit that doesn't work - Midi - > looks OK!). > > > You need to pass parameters to /etc/modules.conf file. Find them in the > > alsa-howto for your card. > > The only place I've found with this info is the INSTALL file in the drivers > distribution and it doesn't list very much for the M-Audio cards. There's > nothing midi-related. I already have the following in my modules.conf: > > # alsa sound > alias char-major-116 snd > options snd snd_major=116 snd_cards_limit=1 > alias snd-card-0 snd-card-ice1712 > > And I tried adding options snd-card-0 snd_enable_midi=1 (and rebooting), but > it made no difference. >
Damn I was hoping there would be a page in the howto. Anyway, when you compiled the driver did you pass this option? ./configure --with-sequencer=yes I assume that the snd_enable_midi=1/0 param is the standard? It would be good to know the easy way to get these params. There should be a file that we can read. I'll see if I can find one. > The output from sndstat is: > > tonto:/etc/modutils# cat /proc/asound/sndstat > Sound Driver:3.8.1a-980706 (ALSA v0.9.0beta10 emulation code) > Kernel: Linux tonto 2.4.14p3n #1 Tue Dec 4 20:52:02 GMT 2001 i686 > Config options: 0 > Installed drivers: > Type 10: ALSA emulation > Card config: > M Audio Audiophile 24/96 at 0x9c00, irq 11 > Audio devices: NOT ENABLED IN CONFIG > Synth devices: NOT ENABLED IN CONFIG > Midi devices: 0: MPU-401 (UART) > Timers: 7: system timer > Mixers: NOT ENABLED IN CONFIG > > And the appropriate section from the INSTALL file reads: > > Module snd-card-ice1712.o > ------------------------- > > Module for Envy24 (ICE1712) based PCI soundcards. > * MidiMan M Audio Delta 1010 > * MidiMan M Audio Delta DiO 2496 > * MidiMan M Audio Delta 66 > * MidiMan M Audio Delta 44 > * MidiMan M Audio Audiophile 2496 > * TerraTec EWS 88MT > * TerraTec EWS 88D > * TerraTec EWX 24/96 > > snd_omni - Omni I/O support for MidiMan M-Audio Delta44/66 > > Module supports up to 8 cards and autoprobe. Note: The consumer part > is not used with all Envy24 based cards (for example in the MidiMan Delta > serie). > > So I don't have the same settings as you, but they don't seem to be required. > > Thanks again, > Andrew -- Patrick Shirkey - Boost Hardware Ltd. Http://www.boosthardware.com - For the discerning hardware connoisseur. http://www.boosthardware.com/LAU/Linux_Audio_Users_Guide/ ======================================================================= _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
