I use Phat Linux 2.2.15-4mdk. My motherboard is AOpen AK33
The sound is integrated on the motherboard: VIA 82C686A
(South Bridge) with AD 1885.
I downloaded and compiled the Alsadrivers, libs and utils
and followed the instructions to load the driver.
The driver loads successful, I can see everything I should in
the /proc/asound directory, etc (below included), I unmuted
the channels, but no sound!
I cannot hear anaything in the console mode, nor in X-Windows.
When I open xmms I can see the spectrum analyzer working,
but no sound.
The settings of the VIA chip are recognized in Linux exactly
as in Windows.
Can anybody give a hint what to do??
Eeltje de Vries
Further information:
==========================================
/proc/asound/sndstat:
Sound Driver:3.8.2-980706 (ALSA v0.5.12a emulation code)
Kernel: Linux PhatLinux.PhatBox 2.2.15-4mdk #3 Sat Dec 2 07:04:38 EST 2000
i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
VIA 82C686A at 0xdc00, irq 10
Audio devices:
0: VIA 82C686A (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices:
0: MPU-401 (UART)
Timers:
7: system timer
Mixers:
0: Analog Devices AD1885
============================================
asound.conf:
# ALSA driver configuration
# This configuration is generated with the alsactl program.
soundcard("card1") {
mixer("Analog Devices AD1885") {
; The type is 'bool'.
switch("AC97 PCM Output Path", false)
; The type is 'bool'.
switch("AC97 Mono Output Select", false)
; The type is 'bool'.
switch("AC97 Second MIC", false)
; The type is 'bool'.
switch("ADC/DAC Loopback", false)
element("Input Gain Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 15
; Voice 1 : Min 0 Max 15
element("Input Gain Volume",0,200,Volume1(9,9))
element("Master Mono Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 31
element("Master Mono Volume",0,200,Volume1(15))
element("Headphone Switch",0,101,Switch2(off))
; Voice 0 : Min 0 Max 63
; Voice 1 : Min 0 Max 63
element("Headphone Volume",0,200,Volume1(0,0))
element("Master Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 63
; Voice 1 : Min 0 Max 63
element("Master Volume",0,200,Volume1(29,29))
; The 3D effect has an on/off switch.
; Center : Min 0 Max 15
; Depth : Min 0 Max 15
element("Effect",0,600,_3D_Effect1(sw=off,center=0,depth=0))
element("Aux Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 31
; Voice 1 : Min 0 Max 31
element("Aux Volume",0,200,Volume1(15,15))
element("Video Switch",0,101,Switch2(off))
; Voice 0 : Min 0 Max 31
; Voice 1 : Min 0 Max 31
element("Video Volume",0,200,Volume1(0,0))
element("CD Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 31
; Voice 1 : Min 0 Max 31
element("CD Volume",0,200,Volume1(17,17))
element("Line Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 31
; Voice 1 : Min 0 Max 31
element("Line Volume",0,200,Volume1(16,16))
element("MIC Switch",0,101,Switch2(off))
; Voice 0 : Min 0 Max 31
element("MIC Volume",0,200,Volume1(0))
; Voice 0 : Min 0 Max 1
element("MIC Boost",0,200,Volume1(0))
element("Phone Switch",0,101,Switch2(off))
; Voice 0 : Min 0 Max 31
element("Phone Volume",0,200,Volume1(0))
element("PC Speaker Switch",0,101,Switch2(off))
; Voice 0 : Min 0 Max 15
element("PC Speaker Volume",0,200,Volume1(0))
element("PCM Switch",0,101,Switch2(on))
; Voice 0 : Min 0 Max 31
; Voice 1 : Min 0 Max 31
element("PCM Volume",0,200,Volume1(19,19))
element("Mono Output MUX",0,401,Mux2(element("Mono-Out
Accumulator",0,301)))
element("Input MUX",0,400,Mux1(element("MIC Boost",0,200),element("MIC
Boost",0,200)))
}
}
========================================
conf.modules:
alias parport_lowlevel parport_pc
alias char-major-116 snd
alias snd-card-0 snd-card-via686a
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-12 snd-pcm-oss
========================================
modules:
snd-card-via686a
snd-pcm-oss
snd-mixer-oss
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
