Is your card isapnp? If not, that is the problem - reconfigure adding --with-isapnp=no to the configure command.
Bill On Thu, 28 Mar 2002, Rick R wrote: > I was able to compile Alsa but when I ran modprobe I get this: > > /lib/modules/2.4.18-6mdk/misc/snd-card-emu10k1.o: init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, including > inva > lid IO or IRQ parameters > modprobe: insmod /lib/modules/2.4.18-6mdk/misc/snd-card-emu10k1.o failed > /lib/modules/2.4.18-6mdk/alsa/snd-card-emu10k1.o.gz: init_module: No such > device > Hint: insmod errors can be caused by incorrect module parameters, including > inva > lid IO or IRQ parameters > modprobe: insmod /lib/modules/2.4.18-6mdk/alsa/snd-card-emu10k1.o.gz failed > modprobe: insmod snd-card-emu10k1 failed > > Also when I run ./snddevices after compiling it creates a /dev/snd symlink > for /proc/asound/dev, but there is no /proc/asound/dev > > Rick > > _______________________________________________ > Alsa-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-user > _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
