Greetings all,
I apologize in advance for the length of my message.
I am using the alsa 0.9.0rc1 driver for the rme9652 and am trying to get
coaxial spdif in from my tascam da-30 dat player. I am able to get
sound out to the dat via coaxial spdif, but all attempts to record
result in an empty file.
I also have an sblive! card that is fully functional running in the same
machine.
I am running linux 2.4.18
cat /proc/asound/card1/rme9652 returns the following:
RME Digi9636 (Rev 1.5) (Card #2)
Buffers: capture e6800000 playback e6600000
IRQ: 19 Registers bus: 0xef000000 VM: 0xe88ab000
Control register: 7401c
Latency: 4096 samples (2 periods of 16384 bytes)
Hardware pointer (frames): 0
Passthru: no
Clock mode: master
ADAT1 Input source: ADAT1 optical
IEC958 input: Coaxial
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 Dolby: off
IEC958 sample rate: error flag set
ADAT Sample rate: 44100Hz
ADAT1: No Lock
ADAT2: No Lock
ADAT3: No Lock
Timecode signal: no
Punch Status:
1: off 2: off 3: off 4: off 5: off 6: off 7: off 8: off
9: off 10: off 11: off 12: off 13: off 14: off 15: off 16: off
17: off 18: off
the rme9652 section of asound.state looks like this:
state.rme9653 {
control.1 {
comment.access 'read write'
comment.type IEC958
iface PCM
name 'IEC958 Playback Default'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.2 {
comment.access 'read write inactive'
comment.type IEC958
iface PCM
name 'IEC958 Playback PCM Stream'
value
'0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.3 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Con Mask'
value
'3b00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.4 {
comment.access read
comment.type IEC958
iface MIXER
name 'IEC958 Playback Pro Mask'
value
'1f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.5 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Coaxial
comment.item.2 Internal
iface PCM
name 'IEC958 Input Connector'
value Coaxial
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'IEC958 Output also on ADAT1'
value false
}
control.7 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 AutoSync
comment.item.1 Master
comment.item.2 'Word Clock'
iface PCM
name 'Sync Mode'
value Master
}
control.8 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 'IEC958 In'
comment.item.1 'ADAT1 In'
comment.item.2 'ADAT2 In'
iface PCM
name 'Preferred Sync Source'
value 'IEC958 In'
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name 'Channels Thru'
value.0 false
value.1 false
value.2 false
value.3 false
value.4 false
value.5 false
value.6 false
value.7 false
value.8 false
value.9 false
value.10 false
value.11 false
value.12 false
value.13 false
value.14 false
value.15 false
value.16 false
value.17 false
}
control.10 {
comment.access read
comment.type INTEGER
comment.range '0 - 96000'
iface PCM
name 'IEC958 Sample Rate'
value 44100
}
control.11 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT1 Sync Check'
value 'No Lock'
}
control.12 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT2 Sync Check'
value 'No Lock'
}
control.13 {
comment.access read
comment.type ENUMERATED
comment.item.0 'No Lock'
comment.item.1 Lock
comment.item.2 'No Lock Sync'
comment.item.3 'Lock Sync'
iface PCM
name 'ADAT3 Sync Check'
value 'No Lock'
}
control.14 {
comment.access read
comment.type BOOLEAN
iface PCM
name 'Timecode Valid'
value false
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
iface PCM
name Passthru
value false
}
control.16 {
comment.access 'read write'
comment.type ENUMERATED
comment.item.0 ADAT1
comment.item.1 Internal
iface PCM
name 'ADAT1 Input Source'
value ADAT1
}
}
Any assistance would be greatly appreciated!
Thank you for your time.
j.c. wilson
--
"It is easier to resist at the beginning than at the end."
-- Leonardo da Vinci
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
