Hello,
> it's just a check. if you can use the chip without problem, it's ok.
>
> remove the two lines at line 1544 of alsa-kernel/pci/via82xx.c:
>
> if ((val = snd_via82xx_codec_xread(chip)) & VIA_REG_AC97_BUSY)
> snd_printk("AC'97 codec is not ready [0x%x]\n", val);
>
Tried this... Still not working correctly.
I can see that via function 5/6, offset 40, bit 0, never flags the codec as
being
ready. It remains 0.
I tossed the board onto the logic analyser and per the Sigmatel STAC9752
data
sheet, I can see the proper reset sequence and the codec issuing the proper
ready bits.
It just seems as if the Via vt82c686B chip isn't listening.
Any ideas?
-Bill
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
