Hallo Clemens,
now here's some more data from home.
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> Does it show up in /proc/asound/cards?
Yes, as:
0 [Edirol ]: USB-Audio - EDIROL UA-20
Roland EDIROL UA-20
(I gave it the id "Edirol" in modules.conf, see below)
> Is snd-usb-audio loaded?
Yes.
> Is usb-midi _not_ loaded?
It isn't loaded. Actually I don't have any file named "*usb*midi*"
under /lib/modules.
> Are there any suspicious messages in /var/log/messages?
Yes, it showed today as "22 Feb" ;) But I changed that now.
Here's a "grep usb" /var/log/messages. Looks okay to me:
Feb 20 15:32:37 tobbi kernel: usb.c: registered new driver usbdevfs
Feb 20 15:32:37 tobbi kernel: usb.c: registered new driver hub
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: $Revision: 1.275 $ time 00:37:43 Nov 19 2002
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: High bandwidth mode enabled
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: USB UHCI at I/O 0xaca0, IRQ 11
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: Detected 2 ports
Feb 20 15:32:37 tobbi kernel: usb.c: new USB bus registered, assigned bus number 1
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: USB UHCI at I/O 0xace0, IRQ 11
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: Detected 2 ports
Feb 20 15:32:37 tobbi kernel: usb.c: new USB bus registered, assigned bus number 2
Feb 20 15:32:37 tobbi kernel: usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
Feb 20 15:32:37 tobbi kernel: usb.c: registered new driver keyboard
Feb 20 15:32:37 tobbi kernel: usbkbd.c: :USB HID Boot Protocol keyboard driver
Feb 20 15:32:37 tobbi kernel: usb.c: registered new driver hiddev
Feb 20 15:32:37 tobbi kernel: usb.c: registered new driver hid
Feb 20 15:32:37 tobbi kernel: usb.c: USB device 2 (vend/prod 0x582/0x26) is not
claimed by any active driver.
Feb 20 15:32:37 tobbi kernel: input0: USB HID v1.00 Mouse [KYE KYE] on usb1:3.0
Feb 20 15:32:38 tobbi kernel: usb.c: registered new driver snd-usb-audio
> Please show the contents of /proc/bus/usb/devices.
I didn't have this virtual file, but I added this line now:
none /proc/bus/usb usbdevfs defaults 0 0
Then it shows this:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ace0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=aca0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0582 ProdID=0026 Rev= 1.01
S: Manufacturer=Roland
S: Product=EDIROL UA-20
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=170mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 192 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
E: Ad=82(I) Atr=05(Isoc) MxPS= 192 Ivl=1ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0458 ProdID=0003 Rev= 0.00
S: Manufacturer=KYE
S: Product=Genius USB Wheel Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
And here's my modules config:
# alsa config fbar
alias char-major-116 snd
alias snd-card-0 snd-usb-audio
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd device_mode=0660 device_gid=29 device_uid=0
options snd-usb-audio index=0 id="Edirol"
alias snd-card-1 snd-intel8x0
alias sound-slot-1 snd-card-1
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
options snd-intel8x0 index=1 id=CARD_0
alias snd-card-2 snd-virmidi
alias sound-slot-2 snd-card-2
Now that's it.
ciao
--
Frank Barknecht _ ______footils.org__
-------------------------------------------------------
This SF.net email is sponsored by: SlickEdit Inc. Develop an edge.
The most comprehensive and flexible code editor you can use.
Code faster. C/C++, C#, Java, HTML, XML, many more. FREE 30-Day Trial.
www.slickedit.com/sourceforge
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
