-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
we are getting there :-)
> ok here is my modules.conf now
>
> >>>>>>>>>>>>>>>>>.
(...)
> alias sound-slot-0 i810_audio
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>
> >/dev/null 2>&1 || :
>
> pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null
> 2>&1 || :
(...)
This has to go. It's NOT alsa. It's the kernel sound driver.
> and my lsmod i ran after it
This already looks ok. But for your first card, the kernel driver is loaded:
> i810_audio 23008 1 (autoclean)
> ac97_codec 11904 0 (autoclean) [i810_audio]
But the alsa modules ARE loaded and also you have OSS emulation loaded.
> snd-pcm-oss 44068 0 (autoclean) (unused)
> snd-mixer-oss 13632 0 (autoclean) [snd-pcm-oss]
> snd-usb-audio 43808 0 (autoclean) (unused)
> snd-pcm 77120 0 (autoclean) [snd-pcm-oss snd-usb-audio]
> snd-timer 13952 0 (autoclean) [snd-pcm]
> snd-rawmidi 16928 0 (autoclean) [snd-usb-audio]
> snd-seq-device 5724 0 (autoclean) [snd-rawmidi]
> snd 44104 0 (autoclean) [snd-pcm-oss snd-mixer-oss
> snd-usb
> -audio snd-pcm snd-timer snd-rawmidi snd-seq-device]
> soundcore 6692 2 (autoclean) [i810_audio snd]
Since it still doesn't work, the question is, what exactly has happened. You
can find out, what cards alsa is using running
cat /proc/asound/cards
It should give you something similar to this:
0 [CS46xx ]: CS46xx - Sound Fusion CS46xx
Sound Fusion CS46xx at 0xea000000/0xe9800000, irq 17
1 [UM2 ]: USB-Audio - UM-2
EDIROL UM-2
After removing the kernel driver from your modules.conf you also should have
two cards. The first would be that intel chip internal card and the second
would be your quattro.
cat /proc/asound/devices
would give you the list of devices that are present. For my system it looks
like this:
0: [0- 0]: ctl
8: [0- 0]: raw midi
18: [0- 2]: digital audio playback
17: [0- 1]: digital audio playback
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
1: : sequencer
33: : timer
32: [1- 0]: ctl
40: [1- 0]: raw midi
You should get more devices for the second card [1 - *] since I only have a
midi interface there. You should also see similar devices as I have for the
first card.
The /dev/dsp* devices are covered by the oss-emulation of alsa. To see which
devices are provided, do:
cat /proc/asound/oss/devices
For my setup this gives:
2: [0- 2]: raw midi
1: : sequencer
8: : sequencer
0: [0- 0]: mixer
3: [0- 3]: digital audio
12: [0-12]: digital audio
18: [1- 2]: raw midi
16: [1- 0]: mixer
0, 3 and 12 are interesting here, they are the dsp devices for my first card.
You should have additional numbers with digital audio for your second card.
Maybe you could provide all the proc output to the list AFTER you got rid of
the kernel stuff in modules.conf. If everything seems to be ok then and you
still don't have sound after you started alsamixer (and alsamixer -c1 for the
second card) to pull up the soundlevels, I can't really help any further,
maybe you need some magic for those cards. I have different cards so I
wouldn't know but I'm sure somebody will. But maybe something else is still
missing that becomes visible. Not to forget, please also provide your current
lsmod output after the change in modules.conf since there one can see if it
was effective.
Good luck,
Richard
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQE+Yz6VWQvEMJfcXlQRAi43AJ9Ape1hURsq4lwDK+0hgYw3V1NqvgCfUku0
JFmounnAUglozqXKvEoo7FI=
=ujc0
-----END PGP SIGNATURE-----
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
