I have noticed this being mentioned on the list before but still there is no readily available solution.
The situation is as follows: I have a sb128pci with the ES1370 chip on it. TeamSpeak 2 requires a full duplex channel to operate (mic recording and a playback channel). Enemy Territory, for some obscure reason, wants a full duplex channel too. My soundcard only has 1 full duplex device and one extra playback device. Now the trick as described before was passing on a parameter that told the playback only device to ignore the calls for a full duplex channel and just act as a half duplex (I propose monoplex for this ;)) device. These were the proposed echoes: echo "et.86 0 0 direct" > /proc/asound/card0/pcm0p/oss % echo "et.86 0 0 disable" > /proc/asound/card0/pcm0c/oss However when starting up ET with anything else than the full duplex device it will give a : Unable to initialize sound: /dev/dsp: No Such Device. Is there a way to use TeamSpeak 2 and ET at the same time without me having to buy new hardware? __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
