On Tuesday 22 July 2003 14:32, Gogulus wrote:
> Hello,
>
> I've got a new laptop from my company, a Clevo 400S with a
> Hungarian company's logo on it. It has SIS 650 Chipset, with SiS 7012
> sound card.
>
> I've a hard time with it regardign sound card and pcmcia port.
>
> The linux, which runs on it, is Debian Woody, kernel is 2.4.21 from
> kernel.org, soundcore, as a module, exists. modprobe i810_audio fails
> on it, so I wanted to give a try to ALSA.
>
> I've done everything written for intel8x0 set up, but when I do
> modprobe snd-intel8x0, I get the following error:
>
> /lib/modules/2.4.21/kernel/sound/pci/snd-intel8x0.o: init_module:
> No such deviceHint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from
> dmesg /lib/modules/2.4.21/kernel/sound/pci/snd-intel8x0.o: insmod
> /lib/modules/2.4.21/kernel/sound/pci/snd-intel8x0.o failed
> /lib/modules/2.4.21/kernel/sound/pci/snd-intel8x0.o: insmod
> snd-intel8x0 failed
>
> From dmesg, the last lines:
>
> PCI: No IRQ known for interrupt pin C of device 00:02.7.
> ALSA intel8x0.c:2332: unable to grab IRQ 0
> Intel ICH soundcard not found or device busy
>
> At previous try dmesg also said: try with pci=biosirq. so this
> trial is with that setting.
>
> lspci -vvx for sound card says:
>
> 00:02.7 Multimedia audio controller: Silicon Integrated Systems
> [SiS] SiS7012 PCI Audio Accelerator (rev a0)
> Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin C routed to IRQ 0
> Region 0: I/O ports at 1400 [size=256]
> Region 1: I/O ports at 1080 [size=128]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00: 39 10 12 70 01 00 90 02 a0 00 01 04 00 ad 00 00
> 10: 01 14 00 00 81 10 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 58 15 00 04
> 30: 00 00 00 00 48 00 00 00 00 00 00 00 ff 03 34 0b
>
> Can anyone help me out on what to set and where? It doesn't matter
> if it needs a kernel recompilation, I can do it.
>
> I believe, I have the same problem with the pcmcia card, as it has
> also IRQ 0...
>
> One more info: I've made a try with 2.6.0-test1, and there sound
> card and pcmcia bridge are both given IRQ5, so I believe, it can be a
> kernel specific issue.
>
> Thanks in advance,
>
> Gogulus
'Plug and Play OS' or something like that must be set to 'no' in the
BIOS.
HTH,
-Frans
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
