On Thu, 20 Nov 2003 [EMAIL PROTECTED] wrote:
>
> I have a STA/Hoontech DSP24 MKII installed on Debian ( woody bf2.4.18 )
> running under ALSA (0.9) using the ice1712 driver. I have also compiled
> the envy24control from alsa-tools-0.1.0. All the drivers and programs
> appear to run without errors and I am able to use the envy24control.
>
> I am not sure how to access the XLR balanced outputs for playback and
> recording. How would they be identified in the envy24control? Also,
> how are they named/identified in the asound.conf or alsa.conf?
>
> The test I would like to perform is to play audio out of one XLR output
> and record it on one of the XLR inputs ( in a loop ). I am assuming that
> once I get the card set up properly, I can use aplay and arecord for this
> purpose. I need to know how to route a PCM playback to an XLR output and
> then route an XLR input to one of the PCM capture channels.
>
> I am not very experience with audio equipment terminology or mixer
> technology so I might be missing something really obvious. Please let me
> know if there is any other information I could provide that would help you
> help me!
If the default code doesn't work then there is no other way than modify
the sources, because only external box with address #0 (check manual) is
activated and used.
Jaroslav
-----
Jaroslav Kysela <[EMAIL PROTECTED]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
