hi, i have some problems with the kernel 2.6-test11 and the audigy card:
on one pc: * Loading ALSA drivers... * Loading: snd-mixer-oss * Loading: snd-pcm-oss * Loading: snd-seq-oss WARNING: Error inserting snd_emu10k1 (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_emu10k1 (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_emu10k1_synth (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for snd_emu10k1_synth * Loading: snd_emu10k1 FATAL: Error inserting snd_emu10k1 (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) * Loading: snd-seq-oss WARNING: Error inserting snd_emu10k1 (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting snd_emu10k1 (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting snd_emu10k1_synth (/lib/modules/2.6.0-test11/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for snd_emu10k1_synth FATAL: Module snd_seq_oss already in kernel. FATAL: Error running install command for snd_seq_oss * Running card-dependent scripts * Restoring Mixer Levels modules.conf # Set this to the correct number of cards. alias char-major-116 snd alias char-major-14 soundcore alias snd-card-0 snd-emu10k1 alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss alias midi snd-emu10k1-synth below snd-seq-oss snd-emu10k1-synth post-install snd-emu10k1-synth /usr/bin/sfxload /usr/share/sfbank/8MBGMSFX.SF2 ; alsactl restore alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss alias /dev/sequencer snd-seq-oss # uncomment to save volume settings at shutdown: pre-remove snd-synth-emu10k1 alsactl store options enable_midi="1" On the other maschine the same modules.conf works better, with sblive and same kernel version. It only hangs an startup with loading "snd-seq-oss". I have to start with the old kernel (2.6-test11 compiled static into the kernel). any suggestions? -- cu denny Gnupg key can be found under pgp.mit.edu, key ID 0x73137598
signature.asc
Description: This is a digitally signed message part
