On Tue, Mar 23, 2004 at 03:42:16PM -0500, Steve Jones wrote: > I've managed to get my Sound Blaster MP3+ USB functioning in > part. Playback works nicely and I can capture from the mic input. > But I've not been able to capture from the 'LINE-IN' inputs, > which is primarily what I'm interested in doing (ooh, so close!). > > Is anyone doing this? > > I'm using the 1.0.3 modules and libs under 2.6.3 and Debian. > > I've tried the captures with both arecord and ecasound. > > I'm not sure what the most relevant diagnostics and config are, > but to start:
OK, it may be cheesy to reply to my own original post, but I thought my /proc/asound stuff might be somehow revealing. Again, I don't seem to be able to capture from my LINE-IN inputs. Note also, that I have no .asoundrc file at all. thanks- ###################################################################### ==> /proc/asound/card0/oss_mixer <== VOLUME "" 0 BASS "" 0 TREBLE "" 0 SYNTH "" 0 PCM "PCM" 0 SPEAKER "" 0 LINE "" 0 MIC "Mic" 0 CD "" 0 IMIX "" 0 ALTPCM "PCM" 1 RECLEV "" 0 IGAIN "" 0 OGAIN "" 0 LINE1 "" 0 LINE2 "" 0 LINE3 "" 0 DIGITAL1 "" 0 DIGITAL2 "" 0 DIGITAL3 "" 0 PHONEIN "" 0 PHONEOUT "" 0 VIDEO "" 0 RADIO "" 0 MONITOR "" 0 ==> /proc/asound/card0/id <== MP3 ==> /proc/asound/card0/usbbus <== 002/003 ==> /proc/asound/card0/usbid <== 041e:3010 ==> /proc/asound/card0/stream0 <== Creative Labs Sound Blaster MP3+ at usb-0000:00:10.0-1 : USB Audio Playback: Status: Stop Interface 1 Altset 1 Format: S16_LE Channels: 2 Endpoint: 1 OUT (ADAPTIVE) Rates: 48000 Capture: Status: Stop Interface 2 Altset 1 Format: S16_LE Channels: 2 Endpoint: 2 IN (ASYNC) Rates: 48000, 44100 ==> /proc/asound/card0/pcm0c/oss <== ==> /proc/asound/card0/pcm0c/sub0/prealloc <== 64 ==> /proc/asound/card0/pcm0c/sub0/status <== closed ==> /proc/asound/card0/pcm0c/sub0/sw_params <== closed ==> /proc/asound/card0/pcm0c/sub0/hw_params <== closed ==> /proc/asound/card0/pcm0c/sub0/info <== card: 0 device: 0 subdevice: 0 stream: CAPTURE id: USB Audio name: USB Audio subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 ==> /proc/asound/card0/pcm0c/xrun_debug <== 0 ==> /proc/asound/card0/pcm0c/info <== card: 0 device: 0 subdevice: 0 stream: CAPTURE id: USB Audio name: USB Audio subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 ==> /proc/asound/card0/pcm0p/oss <== ==> /proc/asound/card0/pcm0p/sub0/prealloc <== 64 ==> /proc/asound/card0/pcm0p/sub0/status <== state: SETUP trigger_time: 1080073548.000562818 tstamp : 1080077438.000272672 delay : 0 avail : 8912 avail_max : 0 ----- hw_ptr : 317520 appl_ptr : 317520 ==> /proc/asound/card0/pcm0p/sub0/sw_params <== tstamp_mode: NONE period_step: 1 sleep_min: 0 avail_min: 1 xfer_align: 1 start_threshold: 1 stop_threshold: 8912 silence_threshold: 1130 silence_size: 1130 boundary: 1168113664 ==> /proc/asound/card0/pcm0p/sub0/hw_params <== access: RW_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 48000 (48000/1) period_size: 1114 buffer_size: 8912 tick_time: 1000 OSS format: S16_LE OSS channels: 2 OSS rate: 44100 OSS period bytes: 4096 OSS periods: 8 ==> /proc/asound/card0/pcm0p/sub0/info <== card: 0 device: 0 subdevice: 0 stream: PLAYBACK id: USB Audio name: USB Audio subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 ==> /proc/asound/card0/pcm0p/xrun_debug <== 0 ==> /proc/asound/card0/pcm0p/info <== card: 0 device: 0 subdevice: 0 stream: PLAYBACK id: USB Audio name: USB Audio subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 0 ==> /proc/asound/pcm <== 00-00: USB Audio : USB Audio : playback 1 : capture 1 ==> /proc/asound/timers <== G0: system timer : 1000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE ==> /proc/asound/modules <== 0 snd_usb_audio ==> /proc/asound/cards <== 0 [MP3 ]: USB-Audio - Sound Blaster MP3+ Creative Labs Sound Blaster MP3+ at usb-0000:00:10.0-1 ==> /proc/asound/devices <== 0: [0- 0]: ctl 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 33: : timer ==> /proc/asound/meminfo <== kmalloc: 15161 bytes vmalloc: 12648 bytes ==> /proc/asound/version <== Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC). Compiled on Mar 16 2004 for kernel 2.6.3faramir.jonescape1.0. ==> /proc/asound/seq/drivers <== ==> /proc/asound/oss/sndstat <== Sound Driver:3.8.1a-980706 (ALSA v1.0.2c emulation code) Kernel: Linux faramir 2.6.3faramir.jonescape1.0 #3 Tue Mar 16 17:29:23 EST 2004 i686 Config options: 0 Installed drivers: Type 10: ALSA emulation Card config: Creative Labs Sound Blaster MP3+ at usb-0000:00:10.0-1 Audio devices: 0: USB Audio (DUPLEX) Synth devices: NOT ENABLED IN CONFIG Midi devices: NOT ENABLED IN CONFIG Timers: 7: system timer Mixers: 0: USB Mixer ==> /proc/asound/oss/devices <== 3: [0- 3]: digital audio 0: [0- 0]: mixer ###################################################################### -- Steve Jones "Outside of a dog, a book is man's best friend. Inside of a dog, it's too dark to read." -- G. Marx ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user