Jeremy C. Reed wrote: > On Wed, 14 Apr 2004, Clemens Ladisch wrote: > > > Jeremy C. Reed wrote: > > > I was able to run the mixers, but any changes were not > > > really done (and no error messages). > > > > Do the changes show up in /etc/asound.conf after running "alsactl > > store"? > > -sh-2.05b# alsactl store > -sh-2.05b# ls -l /etc/asound.conf > ls: /etc/asound.conf: No such file or directory
Oops, I actually meant asound.state. > I don't know why I get those "No such device" lines: > > -sh-2.05b# ls -l /dev/snd/controlC1 /dev/aloadC1 > crw-rw---- 1 root audio 116, 32 Apr 10 21:37 /dev/aloadC1 > crw-rw---- 1 root audio 116, 32 Apr 10 21:37 /dev/snd/controlC1 Because no driver is loaded for the device nodes of the second card. > > What codec do you have? (second line at top of alsamixer screen) > > Chip: Analog Devices AD1881A Please disable all 3D stuff, and try fiddling with the "PCM Out Path" control. > Maybe my speakers outputs are broken. Probably not. The AD1881A has two stereo line-level outputs, and an amplifier is needed for headphones only. Is the headphone output affected by the "Master Volume" control? Regards, Clemens ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
