Vladislav Grinchenko wrote: > I use iMic exclusively for recording from line-in/mic, > and the SBLive with my speakers. > > However, while recording from iMic I want to listen to what > is being recorded to monitor level and etc. Right now, > when I start 'arecord' in one xterm window, in another > I run 'aplay' of the recording and listen to it (with > some delay of course). > > Is there any other way to record from hw:0,0 to a file and > at the same time route the audio to hw:1,0 in one step?
Not with something in your ~/.asoundrc. You would need some program that reads from hw:1 and plays the data back to hw:0. However, the two cards use different clocks, so they would drift apart over time, and you'd get over/underruns. Regards, Clemens ------------------------------------------------------- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only, get FREE Ground shipping on all orders of $35 or more. Hurry up and shop folks, this offer expires April 30th! http://www.thinkgeek.com/freeshipping/?cpg=12297 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user