On Tue, 2004-06-01 at 00:38, Tommi Sakari Uimonen wrote: > > I cannot seem go get the envy24control to mix the SPIDF input. I can > > patch it to HW 1 & 2 Out fine, but when I route via the mixer there is > > no sound. I can see the level bars moving as expected in the SPIDF In > > section. The PCM 1 & 2 works fine in the mixer. I have tried > > mute/unmute, levels, various clock rates, all to no avail. > > The clock _must_ be set to spdif when using the digital input. > Using envy24control to patch the S/PIDF input directly to the HW 1 & 2 Outputs does work with the clock set to S/PIDF. It will also work with the rate set to the rate of the driving device, but I'm sure would result in timing slips.
The problem is when envy24control is set to patch the output of the mixer to HW 1 & 2 Out. I can see the level meters on the S/PIDF Input move but cannot get them to pass sound. The mute and sliders operate visually but don't have any influence on the sound. Setting the timing to S/PIDF or other rates has no effect. The PCM Input 1 & 2 work just fine through the mixer. Darrell ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user