Hi all I have a bcf2000 that used to work perfectly. Sometime in the last two months it stopped responding to midi input, although it still sends midi output. Both over usb.
I'm using 2.6.16-rt23 kernel, and compiled and installed alsa-1.0.11 (checkd that via /proc/asound/version). I've tried the following: - send the v1.10 firmware upgrade to the unit. That worked fine. - turn on midi trace from ardour 0.99.3. It shows midi being sent and received. - connecting a keyboard to the bcf using the qjackctl midi patch bay. The volume slider on the keyboard used to cause the first bcf2000 slider to move, but doesn't anymore. - saving midi output using cat and sending the bytes back to the bcf2000. No response from the bcf2000. Same result using amidi to send and receive. - taking the unit to a dealer. They checked it out and say it works 100% with Nuendo and some other windows software. So it's not the hardware. - I've checked that the unit is in the correct usb mode (u2). - attaching the output from ardour to amidimon and the bcf2000 at the same time. amidimon shows the correct midi messages being sent. So how do I find out where things are going wrong? Is there a debug flag or /proc file I can set to dump midi output as it's sent? thanks John _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
