on 11/21/2006 11:18 PM, eli segal wrote: > Hello all, > > I'm trying to get my RME9632 HDSP sound card working > > so this is what I get ... > I run alsaconf .. > and then I can play with xmms when it set on OSS > if I try play with ALSA I get an error > > BUT > in the hdspmixer I can see the audio coming to A1 & A2 outputs > but I can't no meter what I do route the signal to the analog outputs !!! > so I really can't here nothing :( > > what can I do ? > thanx > Eli > if you want to use the line out, use amixer to set the matrix mixer:
man amixer and take a look at http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=RME&card=Hammerfall+DSP+9652.&chip=FPGA&module=hdsp amixer -c 1 cset numid=5 PLAYBACK_CH_1,ANALOG_OUT_1,5000 amixer -c 1 cset numid=5 PLAYBACK_CH_2,ANALOG_OUT_2,5000 5000 is some gain value, 32768 would be 0dB: 0% 0 = -inf dB 50% 32768 = 0 dB 100% 65535 = +6 dB instead of PLAYBACK_CH_1, ANALOG_OUT_1, PLAYBACK_CH_2, ANALOG_OUT_2 you have to write the correct channel numbers. for a hdsp9652, PLAYBACK_CH_1 is 26 and PLAYBACK_CH_2 is 27. -c 1 is correct if the hdsp is the second soundcard in your system. also make sure the line out is switched on, see: amixer -c 1 contents and search for line out, possibly it's numid=21 you can switch the line out on/off using amixer -c 1 cset numid=21 0 or amixer -c 1 cset numid=21 1 (assuming numid=21 is correct for your card) HTH ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
