Hello,
I am facing the following problem:
I carried out the following commands.
However, the result is no sound.
========
$ cat sounds/alsa/Front_Center.wav >/dev/dsp
========
I do not understand a reason to become this result.
The following is the contents of /proc/asound.
Thanks for any help.
$ for i in `find /proc/asound/ -type f`
> do
> echo === $i ==
> cat $i
> echo
> echo
> echo
> done
== ./card0/oss_mixer ==
VOLUME "Master" 0
BASS "" 0
TREBLE "" 0
SYNTH "" 0
PCM "" 0
SPEAKER "" 0
LINE "Line" 0
MIC "Mic" 0
CD "CD" 0
IMIX "" 0
ALTPCM "" 0
RECLEV "" 0
IGAIN "Capture" 0
OGAIN "" 0
LINE1 "Aux" 0
LINE2 "" 0
LINE3 "" 0
DIGITAL1 "" 0
DIGITAL2 "" 0
DIGITAL3 "" 0
PHONEIN "Phone" 0
PHONEOUT "Master Mono" 0
VIDEO "Video" 0
RADIO "" 0
MONITOR "" 0
== ./card0/id ==
UCB1400
== ./card0/codec97#0/ac97#0-0+regs ==
0:00 = 02a0
0:02 = bf3f
0:04 = 0000
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = 0000
0:0e = 0000
0:10 = 0000
0:12 = 0000
0:14 = 0000
0:16 = 0000
0:18 = 0000
0:1a = 0000
0:1c = 0000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000b
0:28 = 0001
0:2a = 0001
0:2c = bb80
0:2e = 0000
0:30 = 0000
0:32 = bb80
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0948
0:66 = 0000
0:68 = 8002
0:6a = 0050
0:6c = 0030
0:6e = 3fbf
0:70 = 2000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 5053
0:7e = 4304
== ./card0/codec97#0/ac97#0-0 ==
0-0/0: Philips UCB1400
PCI Subsys Vendor: 0x0000
PCI Subsys Device: 0x0000
Capabilities : -loudness-
DAC resolution : 20-bit
ADC resolution : 20-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 DSA=0 VRA
Extended status : VRA
PCM front DAC : 48000Hz
PCM ADC : 48000Hz
== ./card0/pcm0c/oss ==
== ./card0/pcm0c/sub0/status ==
closed
== ./card0/pcm0c/sub0/sw_params ==
closed
== ./card0/pcm0c/sub0/hw_params ==
closed
== ./card0/pcm0c/sub0/info ==
card: 0
device: 0
subdevice: 0
stream: CAPTURE
id: PXA2xx-PCM
name:
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
== ./card0/pcm0c/xrun_debug ==
0
== ./card0/pcm0c/info ==
card: 0
device: 0
subdevice: 0
stream: CAPTURE
id: PXA2xx-PCM
name:
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
== ./card0/pcm0p/oss ==
== ./card0/pcm0p/sub0/status ==
closed
== ./card0/pcm0p/sub0/sw_params ==
closed
== ./card0/pcm0p/sub0/hw_params ==
closed
== ./card0/pcm0p/sub0/info ==
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: PXA2xx-PCM
name:
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
== ./card0/pcm0p/xrun_debug ==
0
== ./card0/pcm0p/info ==
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: PXA2xx-PCM
name:
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
== ./pcm ==
00-00: PXA2xx-PCM : : playback 1 : capture 1
== ./timers ==
G0: system timer : 10000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
== ./cards ==
0 [UCB1400 ]: pxa2xx-ac97 - UCB1400
pxa2xx-ac97 (Philips UCB1400)
== ./devices ==
0: [ 0] : control
1: : sequencer
16: [ 0- 0]: digital audio playback
24: [ 0- 0]: digital audio capture
33: : timer
== ./version ==
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17
2007 UTC).
== ./seq/drivers ==
snd-seq-oss,loaded,0
snd-seq-midi,loaded,0
== ./seq/timer ==
== ./seq/clients ==
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
== ./seq/queues ==
== ./seq/oss ==
OSS sequencer emulation version 0.1.8
ALSA client number 15
ALSA receiver port 0
Number of applications: 0
Number of synth devices: 0
Number of MIDI devices: 0
== ./oss/sndstat ==
Sound Driver:3.8.1a-980706 (ALSA v1.0.14rc1 emulation code)
Kernel: Linux (none) 2.6.20.21 #27 PREEMPT Fri Dec 14 15:57:27 JST 2007 armv5tel
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
pxa2xx-ac97 (Philips UCB1400)
Audio devices:
0: (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Philips UCB1400
== ./oss/devices ==
0: [0- 0]: mixer
1: : sequencer
3: [0- 0]: digital audio
4: [0- 0]: digital audio
8: : sequencer
Regards Kim
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
