On 20/12/2007, at 2:35 AM, Jeremy Mordkoff wrote: >> I haven't reset/resync'd the receiver at all, but when I switch to >> decoded audio the receiver displays 'PCM' instead of 'DTS', so it is >> detecting the change. > > I would not be surprised if 'DTS' means AC3 and 'PCM' means anything > else (isn't PCM headerless?). > > Is mplayer transcoding to PCM? I'll bet it has to be 44.1 or 48 KHz. > > JLM
When I play DTS with DTS passthrough, the receiver displays 'DTS'; when I play AC3 file with AC3 passthrough, it displays 'Dolby Digital'; if I'm playing a raw unencoded stream, it displays PCM. It doesn't seem to be a sample rate problem. When mplayer decodes a 48 KHz file from FLAC/MP3 to PCM and plays it, it's playing at 48 KHz and that's the same rate the receiver is detecting (displays "PCM 48000Hz"). ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
