---------- Forwarded message ----------
From: Quasi Steady State <[EMAIL PROTECTED]>
Date: Jan 15, 2008 10:35 AM
Subject: Configure sound card for hundreds devices at once
To: [EMAIL PROTECTED]
Hi all,
I have an problem with automatic configuring the volume levels with ALSA.
I made a Linux system with only a kernel, busybox and some library's.
The linux system must be installed on the exact same hardware like hundreds
times.
The first time I installed ALSA (static compiled in the kernel) I must
enable (un-mute) the volume levels in '*alsamixer*'.
Then I stored the levels with '*alsctl store*'.
Everytime the system is booting I run the command 'alsactl -F restore'.
Everything goes perfect. But if I *change the harddisk (flash-card) from the
device to another (same hardware) device I get an error during booting:*
Error if '*alsactl -F restore* ' is run I get the following errors:
1. alsactl: set_control:970: failed to obtain info for control #3 (No such
file or directory)
2. alsactl: set_control:1085: bad control.16.value type
Error 1 occures 11 times.
I run kernel 2.6.23.1.
Does someone have an idea what is going wrong?
thanx in advance.
P.S. If i run alsamixer on the new device and save the settings. Everything
is perfect. But if I change the harddisk (flash-card) back to another device
I have the same problem.
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
