Hi,
I''ve been trying to get audio output from multiple cards working but
have not had much luck.
What I would like to happen is for 2 channel stereo audio to work over
the HDMI connector (to TV) and 5.1 channel DD and/or DTS to work over
the optical output (to receiver) simultaneously.
Below is my current .asoundrc file. It is the closest I've come to
getting the required outputs to work. Usually I get only one of the
outputs working.
pcm.hdmi {
type hw
card 3
device 3
}
pcm.optical {
type hw
card 0
device 1
}
pcm.multi {
type multi
slaves.a.pcm "hdmi"
slaves.a.channels 2
slaves.b.pcm "optical"
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}
The outputs of aplay -l and aplay -L follow:
[EMAIL PROTECTED]:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC882 Analog [ALC882 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC882 Digital [ALC882 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[EMAIL PROTECTED]:~$ aplay -L
default:CARD=SB
HDA ATI SB, ALC882 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC882 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC882 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=SAA7134
SAA7134, SAA7134 PCM
Default Audio Device
default:CARD=SAA7134_1
SAA7134, SAA7134 PCM
Default Audio Device
Can anyone help me get this working correctly? Any hints would be
greatly appreciated.
Thanks,
Vitaly
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
