Try setting alsa device to plughw:0,2 or hw:0,2 when playing. Did it work? 2008/9/12 Eric T. Barnett <[EMAIL PROTECTED]>: > Sure! > > Here's my aplay -l > > card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > -----Original Message----- > From: Vedran Miletić [mailto:[EMAIL PROTECTED] > Sent: Friday, September 12, 2008 10:06 AM > To: Eric T. Barnett > Cc: alsa-user@lists.sourceforge.net > Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768 > > Can you post output of "aplay -l"? > > 2008/9/12 Eric T. Barnett <[EMAIL PROTECTED]>: >> Nope. Didn't work. Even tried pcm.!default iec958 >> >> >> >> Does anyone on the list have a Diamond xtreme 7.1? or this chipset? >> >> >> >> Thanks, >> >> Eric >> >> >> >> -----Original Message----- >> >> From: [EMAIL PROTECTED] on behalf of Floris >> >> Sent: Wed 9/10/2008 7:48 AM >> >> To: alsa-user@lists.sourceforge.net >> >> Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768 >> >> >> >> Hey Eric, >> >> >> >> here is the solution I use with the Audigy 2 ZS sound card: >> >> In ~/.asoundrc or asound.conf write only this line >> >> >> >> pcm.!default spdif >> >> >> >> restart Alsa >> >> Now all the "default sounds" will go to the spdif output. >> >> hope this will fix your problem >> >> >> >> Floris >> >> >> >> >> >> Eric T. Barnett schreef: >> >>> >> >>> Hi folks, >> >>> >> >>> I'm new to the list and relatively new to Linux. I've been everywhere >> >>> and I can't get a straight (or working) answer for something that is >> >>> about to drive me nuts! >> >>> >> >>> I'm running the newest version of Knoppmyth. I'm using a Diamond >> >>> XtremeSound 7.1 card that has the CMI8768 chipset. I can get the SPDIF >> >>> out working for any program that will allow me to specifically direct >> >>> the sound to the IEC port. However, I cannot get the sound to work on >> >>> programs that do not have this capability and run off of the DEFAULT. >> >>> Obviously, I've got something hosed with my asound.conf. I just can't >> >>> figure out what!! HELP!! I've been working on this for weeks. >> >>> >> >>> The aplay -l command gives me that the IEC958 port is on card 0 device >> >>> 2. Can someone give me a config that they have working on their >> >>> machine? I've got this question floating around in about 3 forums now, >> >>> so I thought I'd go straight to the source. >> >>> >> >>> Many thanks in advance, >> >>> >> >>> Eric >> >>> >> >>> ---------------------------------------------------------------------- >> >>> -- >> >>> >> >>> ---------------------------------------------------------------------- >> >>> --- This SF.Net email is sponsored by the Moblin Your Move Developer's >> >>> challenge Build the coolest Linux based applications with Moblin SDK & >> >>> win great prizes Grand prize is a trip for two to an Open Source event >> >>> anywhere in the world >> >>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> >>> ---------------------------------------------------------------------- >> >>> -- >> >>> >> >>> _______________________________________________ >> >>> Alsa-user mailing list >> >>> Alsa-user@lists.sourceforge.net >> >>> https://lists.sourceforge.net/lists/listinfo/alsa-user >> >>> >> >> >> >> >> >> ------------------------------------------------------------------------- >> >> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge >> Build the coolest Linux based applications with Moblin SDK & win great >> prizes Grand prize is a trip for two to an Open Source event anywhere in the >> world http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> >> _______________________________________________ >> >> Alsa-user mailing list >> >> Alsa-user@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/alsa-user >> >> >> >> >> >> >> >> ------------------------------------------------------------------------- >> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge >> Build the coolest Linux based applications with Moblin SDK & win great >> prizes >> Grand prize is a trip for two to an Open Source event anywhere in the world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> Alsa-user mailing list >> Alsa-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/alsa-user >> >> > > > > -- > Vedran Miletić > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user >
-- Vedran Miletić ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
