Hi Mark,
thanks for your answer, some questions:
Mark Jenks schrieb:
...
>> Now I'm trying to split front and rear output to use them for master and
>> headphone output in mixxx (dj mixer app).
...
> This is the way that I've done it, and it works everytime.
>
> pcm_slave.eightchannels {
> pcm "hw:1,0" # or "hw:1,0" for the second card
this should be pcm "hw:0,0" for the first card, right?
Does your .asoundrc start with the code above, or do you have s.th.
before like:
pcm.intel8x0 {
type hw
card 0
device 0
> channels 8
you define eight channels, and configure three separate stereo devices
in the following - channels 6/7 are left unused?
My soundcard is a 5.1, I should write channels 6?
Do you have anything else configured, i.e. in /etc/asound.conf?
> }
> pcm.stereo1 {
> type plug
> slave.pcm {
> type dshare
> ipc_key 87882222
> slave eightchannels
> bindings [ 0 1 ]
> }
> }
> pcm.stereo2 {
> type plug
> slave.pcm {
> type dshare
> ipc_key 87882222
> slave eightchannels
> bindings [ 2 3 ]
> }
> }
> pcm.stereo3 {
> type plug
> slave.pcm {
> type dshare
> ipc_key 87882222
> slave eightchannels
> bindings [ 4 5 ]
> }
> }
>
Cheers,
Frisco
--
Personal weblog and more: http://bischof.homelinux.net
Stilblüten aus Schreiben von Versicherungsnehmern:
Ich überfuhr einen Mann. Er gab seine Schuld zu, da ihm dies schon
einmal passiert war.
------------------------------------------------------------------------------
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
