On Thursday 14 May 2009, Grant wrote:
> I added this to /etc/asound.conf:
>
> pcm.!default {
> type plug
> slave.pcm {
> type dmix
> ipc_key 1024
> slave {
> pcm "hw:0"
> format S24_3LE
> rate 96000
> }
> }
> }
are you sure "S24_3LE" is the proper format for your card?
even if it is a "24-96" card, it may require something like U/S32_??
or FLOAT*_?? format. In principle trying to feed it with an unsupported
format should cause an error, but who knows...
BTW: what if you remove everything from asound.conf and just play to
"plughw:0,0" as per default?
If that works, next step is trying to upsample but using the default
plughw for output, that is something like this (*):
pcm.up96k {
type plug
slave {
pcm "plughw:0,0"
rate 96000
}
}
(*) N.B.: written on the fly. I am by no means an alsa/asoundrc
expert, so... check the syntax!
Ciao,
Paolo.
--
You can still escape from the GATES of hell: Use Linux!
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
