Add CC to Zhenyu. Thanks, Fengguang
On Sun, May 30, 2010 at 07:49:13PM +0800, David Härdeman wrote: > Hi Wu, I'm back to breaking stuff again :) > > First of all, the good news, HDMI (and SPDIF) audio works really well > with 2.6.34...none of the previous problems with silence etc, seem to > remain and the driver now seems to automagically map the channels to > what ALSA userspace expects. > > However, I've found a new issue. > > My receiver likes to report a hardcoded list of supported video modes > (1080i being the main one) via EDID which are not really useful. So I > usually don't see the boot messages (X.org has 1080p hardcoded so once > it starts I get a reasonable mode). > > I recently tried played with the video= kernel parameter, and booting > with: > video="HDMI Type A-1:1920x1...@60d" > > gives me a proper video mode from the beginning. However, it also seems > to break HDMI audio. Booting with that parameter -> no audio, receiver > doesn't light up, etc. Booting without that parameter -> audio works as > expected. > > Any ideas? > > -- > David Härdeman ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
