Hi,
I am running
Linux sophi 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:27:43 CEST 2010
i686 AMD Athlon(tm) 64 Processor 3500+ AuthenticAMD GNU/Linux [
archlinux i686 ]
The alsa packages I have installed are
alsa-lib 1.0.23-1
alsa-oss 1.0.17-1
alsa-utils 1.0.23-2
My Sound Device is
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]
(VIA High Definition Audio Controller)
I can get Sound through speakers very well but I sound input through
mic doesnot work :-(
What could be the trouble?
The useful info is given below
thanks
Siju
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. Device 6290
00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South]
00:0f.0 RAID bus controller: VIA Technologies, Inc. VT8251 AHCI/SATA
4-Port Controller
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 90)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc.
K8M890CE/K8N890CE [Chrome 9] (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]
(VIA High Definition Audio Controller)
========
mixer settings are :
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [on]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Phone',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 2 [13%] [-39.00dB] [on]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mono',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Mono
Limits: Playback 0 - 31
Mono: Capture [off]
Front Left: Playback 31 [100%] [0.00dB] [on]
Front Right: Playback 31 [100%] [0.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Stereo Downmix',0
Capabilities: pswitch penum
Playback channels: Front Left - Front Right
Mono:
Front Left: Playback [on]
Front Right: Playback [on]
============
dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34-ARCH (tho...@evey) (gcc version 4.5.0 20100610
(prerelease) (GCC) ) #1 SMP PREEMPT Wed Aug 4 14:27:43 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bfb0000 (usable)
BIOS-e820: 000000001bfb0000 - 000000001bfbe000 (ACPI data)
BIOS-e820: 000000001bfbe000 - 000000001bfe0000 (ACPI NVS)
BIOS-e820: 000000001bfe0000 - 000000001c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1bfb0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFE0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001bfb0000 (usable)
modified: 000000001bfb0000 - 000000001bfbe000 (ACPI data)
modified: 000000001bfbe000 - 000000001bfe0000 (ACPI NVS)
modified: 000000001bfe0000 - 000000001c000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fecc0000 - 00000000fecc1000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-000000001bfb0000
0000000000 - 0000400000 page 4k
0000400000 - 001bc00000 page 2M
001bc00000 - 001bfb0000 page 4k
kernel direct mapping tables up to 1bfb0000 @ 15000-1a000
RAMDISK: 1bdec000 - 1bfa0000
ACPI: RSDP 000fa850 00014 (v00 ACPIAM)
ACPI: RSDT 1bfb0000 00034 (v01 A M I OEMRSDT 06000619 MSFT 00000097)
ACPI: FACP 1bfb0200 00084 (v02 A M I OEMFACP 06000619 MSFT 00000097)
ACPI: DSDT 1bfb0440 0498E (v01 A0339 A0339000 00000000 INTL 02002026)
ACPI: FACS 1bfbe000 00040
ACPI: APIC 1bfb0390 00068 (v01 A M I OEMAPIC 06000619 MSFT 00000097)
ACPI: MCFG 1bfb0400 0003C (v01 A M I OEMMCFG 06000619 MSFT 00000097)
ACPI: OEMB 1bfbe040 00046 (v01 A M I AMI_OEM 06000619 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
447MB LOWMEM available.
mapped low ram: 0 - 1bfb0000
low ram: 0 - 1bfb0000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001bfb0
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001bfb0
On node 0 totalpages: 114495
free_area_init_node: node 0, pgdat c1402fc0, node_mem_map c1562200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 864 pages used for memmap
Normal zone: 109648 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 48
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34388 r0 d22956 u2097152
pcpu-alloc: s34388 r0 d22956 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113599
Kernel command line: root=/dev/sda3 ro
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2291840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (46 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 0001559d84] TEXT DATA BSS
#3 [001bdec000 - 001bfa0000] RAMDISK
#4 [000155a000 - 0001560214] BRK
#5 [00000ff790 - 0000100000] BIOS reserved
#6 [00000ff780 - 00000ff790] MP-table mpf
#7 [000009fc00 - 00000f19b0] BIOS reserved
#8 [00000f1b00 - 00000ff780] BIOS reserved
#9 [00000f19b0 - 00000f1b00] MP-table mpc
#10 [0000010000 - 0000011000] TRAMPOLINE
#11 [0000011000 - 0000015000] ACPI WAKEUP
#12 [0000015000 - 0000016000] PGTABLE
#13 [0001561000 - 0001562000] BOOTMEM
#14 [0001562000 - 00018e2000] BOOTMEM
#15 [0001559dc0 - 0001559dc4] BOOTMEM
#16 [0001559e00 - 0001559ec0] BOOTMEM
#17 [0001559ec0 - 0001559eec] BOOTMEM
#18 [00018e2000 - 00018e3800] BOOTMEM
#19 [0001559f00 - 0001559f4e] BOOTMEM
#20 [0001560240 - 0001560374] BOOTMEM
#21 [0001559f80 - 0001559fc0] BOOTMEM
#22 [0001559fc0 - 000155a000] BOOTMEM
#23 [0001560380 - 00015603c0] BOOTMEM
#24 [00015603c0 - 0001560400] BOOTMEM
#25 [0001560400 - 0001560440] BOOTMEM
#26 [0001560440 - 0001560480] BOOTMEM
#27 [0001560480 - 00015604c0] BOOTMEM
#28 [00015604c0 - 0001560500] BOOTMEM
#29 [0001560500 - 0001560540] BOOTMEM
#30 [0001560540 - 0001560580] BOOTMEM
#31 [0001560580 - 0001560590] BOOTMEM
#32 [00015605c0 - 00015605d2] BOOTMEM
#33 [0001560600 - 0001560612] BOOTMEM
#34 [0001c00000 - 0001c0e000] BOOTMEM
#35 [0001e00000 - 0001e0e000] BOOTMEM
#36 [0001560640 - 0001560644] BOOTMEM
#37 [0001560680 - 0001560684] BOOTMEM
#38 [00015606c0 - 00015606c8] BOOTMEM
#39 [0001560700 - 0001560708] BOOTMEM
#40 [0001560740 - 00015607e8] BOOTMEM
#41 [0001560800 - 0001560868] BOOTMEM
#42 [00018e3800 - 00018e5800] BOOTMEM
#43 [00018e5800 - 0001925800] BOOTMEM
#44 [0001925800 - 0001945800] BOOTMEM
#45 [0001946000 - 0001b75880] BOOTMEM
Initializing HighMem for node 0 (00000000:00000000)
Memory: 444364k/458432k available (2930k kernel code, 13616k reserved,
1208k data, 404k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdc7b0000 - 0xff7fe000 ( 560 MB)
lowmem : 0xc0000000 - 0xdbfb0000 ( 447 MB)
.init : 0xc140b000 - 0xc1470000 ( 404 kB)
.data : 0xc12dca0c - 0xc140adc0 (1208 kB)
.text : 0xc1000000 - 0xc12dca0c (2930 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2200.424 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4402.21 BogoMIPS (lpj=7334746)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20100121
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (4402.21 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000020000000 aka 512M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [20000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x20000000-0xffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - F5, should be E7
(20100121/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfff7ffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10: [io 0xe800-0xe807]
pci 0000:00:0f.0: reg 14: [io 0xe400-0xe403]
pci 0000:00:0f.0: reg 18: [io 0xe000-0xe007]
pci 0000:00:0f.0: reg 1c: [io 0xd800-0xd803]
pci 0000:00:0f.0: reg 20: [io 0xd400-0xd40f]
pci 0000:00:0f.0: reg 24: [mem 0xf9fffc00-0xf9ffffff]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:0f.0: PME# disabled
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: reg 20: [io 0xd000-0xd01f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20: [io 0xc800-0xc81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20: [io 0xc400-0xc41f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20: [io 0xc000-0xc01f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10: [mem 0xf9fff800-0xf9fff8ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:12.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:00:12.0: reg 14: [mem 0xf9fff400-0xf9fff4ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 30: [mem 0xfbef0000-0xfbefffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:04:01.0: reg 10: [mem 0xfbffc000-0xfbffffff]
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:13.1: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x20000000-0xffffffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000001bfb0000 - 000000001bffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x0290-0x0297] has been reserved
system 00:08: [io 0x03e0-0x03e7] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0400-0x041f] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x1fffffff] could not be reserved
system 00:0e: [mem 0xfff80000-0xffffffff] has been reserved
Switching to clocksource acpi_pm
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io disabled]
pci 0000:00:13.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:13.0: bridge window [mem pref disabled]
pci 0000:00:13.1: PCI bridge to [bus 05-05]
pci 0000:00:13.1: bridge window [io disabled]
pci 0000:00:13.1: bridge window [mem disabled]
pci 0000:00:13.1: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 6 [mem 0x20000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1744k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1281248314.203:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 871
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 404k freed
udev: starting version 160
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
Floppy drive(s): fd0 is 1.44M
libata version 3.00 loaded.
ahci 0000:00:0f.0: version 3.0
ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0f.0: PCI: Disallowing DAC for device
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl RAID mode
ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1...@0xf9fffc00 port 0xf9fffd00 irq 21
ata2: SATA max UDMA/133 abar m1...@0xf9fffc00 port 0xf9fffd80 irq 21
ata3: SATA max UDMA/133 abar m1...@0xf9fffc00 port 0xf9fffe00 irq 21
ata4: SATA max UDMA/133 abar m1...@0xf9fffc00 port 0xf9fffe80 irq 21
FDC 0 is a post-1991 82077
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
pata_via 0000:00:0f.1: version 0.3.4
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata5.00: ATA-6: ST340014A, 8.01, max UDMA/100
ata5.00: 78165360 sectors, multi 16: LBA48
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA ST340014A 8.01 PQ: 0 ANSI: 5
ata6.01: ATAPI: Optiarc DVD RW AD-7190A, 1.02, max UDMA/66
ata6.01: configured for UDMA/66
scsi 5:0:1:0: CD-ROM Optiarc DVD RW AD-7190A 1.02 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 8x/8x writer dvd-ram
cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:1:0: Attached scsi CD-ROM sr0
sda5 sda6 >
sda2: <openbsd: sda7 sda8bad subpartition - ignored
bad subpartition - ignored
>
sd 4:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
udev: starting version 160
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sr 5:0:1:0: Attached scsi generic sg1 type 5
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1b800, 00:11:d8:01:23:45, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input4
psmouse serio1: ID: 10 00 64
logips2pp: Detected unknown logitech mouse model 106
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
lp: driver loaded but no devices found
Linux agpgart interface v0.103
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 22, io mem 0xf9fff800
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000c000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:04:01.0: setting latency timer to 64
input: ImExPS/2 Logitech Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
usb 3-1: new full speed USB device using uhci_hcd and address 2
sr 5:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 5:0:1:0: [sr0] Sense Key : 0x5 [current]
sr 5:0:1:0: [sr0] ASC=0x21 ASCQ=0x0
sr 5:0:1:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 5:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 5:0:1:0: [sr0] Sense Key : 0x5 [current]
sr 5:0:1:0: [sr0] ASC=0x21 ASCQ=0x0
sr 5:0:1:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 5:0:1:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 5:0:1:0: [sr0] Sense Key : 0x5 [current]
sr 5:0:1:0: [sr0] ASC=0x21 ASCQ=0x0
sr 5:0:1:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input6
Linux video capture interface: v2.00
gspca: main v2.9.0 registered
gspca: probing 046d:08af
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe sensor -> 0011
zc3xx: Find Sensor HV7131R(c)
input: zc3xx as /devices/pci0000:00/0000:00:10.1/usb3/3-1/input/input7
gspca: video0 created
gspca: found int in endpoint: 0x82, buffer_len=8, interval=10
usbcore: registered new interface driver zc3xx
zc3xx: registered
Adding 497976k swap on /dev/sda5. Priority:-1 extents:1 across:497976k
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
