I'm trying to debug MIDI on my M-Audio 1010LT card. I have jack running, a2jmidid -e and aseqdump work with my USB MIDI keyboard, but I can't seem to verify ANY incoming or outgoing MIDI data on the M-Audio 1010LT card.
aconnect -li client 0: 'System' [type=kernel] 0 'Timer ' 1 'Announce ' Connecting To: 128:0, 130:0 client 14: 'Midi Through' [type=kernel] 0 'Midi Through Port-0' Connecting To: 130:0[real:0] Connected From: 130:0 client 16: 'M Audio Delta 1010LT' [type=kernel] 0 'M Audio Delta 1010LT MIDI' Connecting To: 130:0[real:0] Connected From: 130:0 proc/asound/M1010LT/midi0 shows M Audio Delta 1010LT MIDI Output 0 Tx bytes : 0 Owner PID : 5445 Mode : native Buffer size : 4096 Avail : 4096 Input 0 Rx bytes : 0 Owner PID : 5445 Buffer size : 4096 Avail : 0 Overruns : 0 I've tried two different MIDI note generators and two different cables to rule that out. My FCB1010 foot controller will send MIDI to other devices, but I'm not getting anything on the M1010LT card. One thing I noticed, while mulling through the mailing list archives is that I have no snd-virmidi module loaded. lsmod|egrep "snd|midi" snd_hrtimer 12744 1 snd_seq_dummy 12762 2 snd_seq_midi 13564 2 snd_seq_midi_event 14436 1 snd_seq_midi snd_hda_codec_via 31874 1 snd_hda_codec_generic 67697 1 snd_hda_codec_via snd_hda_codec_hdmi 51916 1 snd_hda_intel 30520 7 snd_ice1712 75341 8 snd_cs8427 18214 1 snd_ice1712 snd_i2c 13828 2 snd_ice1712,snd_cs8427 snd_ice17xx_ak4xxx 13128 1 snd_ice1712 snd_hda_controller 30207 1 snd_hda_intel snd_ak4xxx_adda 18487 2 snd_ice1712,snd_ice17xx_ak4xxx snd_mpu401_uart 13992 1 snd_ice1712 snd_hda_codec 135270 5 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller snd_rawmidi 29794 2 snd_mpu401_uart,snd_seq_midi snd_hwdep 17650 1 snd_hda_codec snd_ac97_codec 133528 1 snd_ice1712 snd_seq 62266 16 snd_seq_midi_event,snd_seq_dummy,snd_seq_midi snd_seq_device 14461 4 snd_seq,snd_rawmidi,snd_seq_dummy,snd_seq_midi ac97_bus 12682 1 snd_ac97_codec snd_pcm 110917 8 snd_ice1712,snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller snd_timer 28778 3 snd_hrtimer,snd_pcm,snd_seq snd 75905 44 snd_ice1712,snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_i2c,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_ak4xxx_adda,snd_hda_intel,snd_mpu401_uart,snd_seq_device,snd_cs8427 soundcore 14491 2 snd,snd_hda_codec At this point I'm beginning to wonder if I have a dead MIDI dongle on my card (the HD-15 connector), but I have no way to verify that. The fact that proc/asound/M1010LT/midi0 shows 0 bytes received appears really ominous, and I'm short on explanations. At some point in the past (couple years ago) I was able to generate MIDI from the controller (Yamaha G-50) and play sounds on Qsynth using this same HW. Anyone have further insight into what could be wrong here?
------------------------------------------------------------------------------
_______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user